VT machining offers CNC Swiss Machining for C102 Copper (UNS C10200 / OF / Cu-OF), typically supplied annealed or H02. Oxygen-free copper, slightly lower purity than C101.
CNC Swiss Machining Notes for C102 Copper
C102 Copper can be Swiss-turned, but slower cutting data and guide-bushing clearances are set for this grade to protect slender features.
For estimating, a 100 × 100 × 10 mm block of C102 Copper weighs about 0.89 kg.
Starting Parameters for CNC Swiss Machining C102 Copper
| Cutting speed (carbide) | 135-270 m/min |
|---|---|
| Feed | 0.08-0.25 mm/rev |
| Spindle speed, Ø8 mm bar | 5370-10740 rpm |
| Insert / tool class | ISO N — sharp, polished, uncoated or DLC |
| Coolant | Emulsion; very sharp polished tools to avoid smearing |
| Length-to-diameter capability | up to ~10:1 (slower feeds for this grade) |
Starting values for C102 Copper, Annealed or H02; optimised on the first article.
Full material data for C102 Copper (UNS C10200 / OF / Cu-OF) is on the CNC Turning C102 Copper page.
More on CNC Swiss Machining Copper
Finishing options, quality documentation and general cnc swiss machining guidance for all copper grades are on our CNC Swiss Machining Copper page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Swiss Machining C102 Copper
Send a STEP/IGES model or PDF drawing, confirm C102 Copper and its condition (we usually see it supplied annealed or H02), the quantity, critical tolerances and any finish or certificate requirements.
C102 Copper in Other Processes
Related
Send the drawing, the C102 Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Swiss Machining C102 Copper?
CNC Swiss Machining prototypes for C102 Copper can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What surface finish is achievable on C102 Copper with CNC Swiss Machining?
Surface finish on C102 Copper is controlled to your specification; we confirm the achievable Ra against your callout.
Does CNC Swiss Machining C102 Copper require dedicated tooling?
Most C102 Copper turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What material thickness or size range suits CNC Swiss Machining C102 Copper?
Turned C102 Copper parts are produced from bar or chuck stock across a wide diameter range.
Can VT machining make custom C102 Copper parts to my drawing?
Yes. C102 Copper turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What is CNC Swiss Machining C102 Copper and how is it done?
CNC Swiss Machining C102 Copper refers to swiss-type machining guides bar stock through a sliding headstock for high-accuracy small, slender parts. Applied to C102 Copper — excellent electrical and thermal conductivity — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.