VT machining specialises in CNC Waterjet Cutting C102 Copper. Because C102 Copper is excellent electrical and thermal conductivity, and its machinability is moderate; gummy, so sharp tooling and coolant are used, we plan each job around the grade to protect accuracy and surface quality.
CNC Waterjet Cutting Capability for C102 Copper
- Excellent conductivity
- Thermal management
- Tolerance to ±0.02 mm
- Solderable
C102 Copper Material Data
| Density | 8.94 g/cm³ |
|---|---|
| Tensile strength | 220–350 MPa |
| Yield strength (0.2%) | 70–330 MPa |
| Hardness | 40–100 HV |
| Melting point | 1083 °C |
| Thermal conductivity | 391 W/m·K |
| Thermal expansion | 17.0 ×10⁻⁶/K |
| Electrical conductivity | 101% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C10100 OFE, C10200 OF, C11000 ETP, C14500 tellurium copper |
Published typical values for C11000 ETP. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It smears rather than cuts. Razor-sharp uncoated tooling and high rake; if the print allows it, C14500 tellurium copper machines four times better at ~90% IACS.
Machining C102 Copper with CNC Waterjet Cutting
The machinability of C102 Copper is moderate; gummy, so sharp tooling and coolant are used. For CNC Waterjet Cutting we select tooling, feeds, speeds and coolant to match, keeping the C102 Copper workpiece stable and the result accurate.
Because we machine C102 Copper regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Waterjet Cutting C102 Copper
| Feature | Standard | Precision |
|---|---|---|
| Contour dimension | ±0.10 mm | ±0.05 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Kerf width | 0.20 mm | 0.10 mm |
| Squareness of cut edge | 0.5° | 0.2° |
| Heat-affected zone | 0.15 mm | 0.05 mm (N₂ assist) |
| Minimum hole diameter | 1.2 × thickness | 1.0 × thickness |
| Edge condition | light dross | burr-free, N₂ cut |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Waterjet Cutting C102 Copper
A few design choices make a real difference to cost and quality. Keeping holes no smaller than the material thickness, allowing for kerf, and grouping features sensibly improves edge quality and nesting yield on C102 Copper. If you send your model early, we will return practical DFM feedback before you commit to production.
Why C102 Copper?
Specifying C102 Copper for CNC Waterjet Cutting C102 Copper is usually about its properties: excellent electrical and thermal conductivity. Tell us the condition you need and we machine to it.
Secondary Operations & Finishing
We complete C102 Copper components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
CNC Waterjet Cutting Tolerances & Surface Finish
Laser-cut C102 Copper holds contour tolerances around ±0.05 mm depending on thickness, with a narrow kerf and a clean, near burr-free edge.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
CNC Waterjet Cutting Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on C102 Copper parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Applications of CNC Waterjet Cutting C102 Copper
CNC Waterjet Cutting of C102 Copper supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Waterjet Cutting C102 Copper
Ordering C102 Copper parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for C102 Copper
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Tin plate | 3–15 µm | Solderable, prevents oxidation |
| Silver plate | 2–10 µm | Lowest contact resistance for RF and power |
| Nickel underplate | 2–5 µm | Diffusion barrier under tin or gold |
| Gold flash | 0.05–1 µm | Contact surfaces, over nickel |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Waterjet Cutting C102 Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C102 Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C102 Copper in Other Processes
Related
Send the drawing, the C102 Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Does CNC Waterjet Cutting C102 Copper require dedicated tooling?
Most C102 Copper cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
How clean are the edges produced by CNC Waterjet Cutting on C102 Copper?
Laser cutting leaves C102 Copper with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.
What tolerances can you hold for CNC Waterjet Cutting C102 Copper?
Achievable tolerances for C102 Copper cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.
Which industries use CNC Waterjet Cutting C102 Copper parts?
CNC Waterjet Cutting C102 Copper parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C102 Copper components are required.
What is the typical lead time and minimum order for CNC Waterjet Cutting C102 Copper?
CNC Waterjet Cutting prototypes for C102 Copper can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What material thickness or size range suits CNC Waterjet Cutting C102 Copper?
Laser-cut C102 Copper thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.