Looking for reliable CNC Swiss Machining Copper? VT machining manufactures Copper parts to tight tolerances and consistent quality. Copper is excellent electrical and thermal conductivity, so the process is set up specifically for the material.
CNC Swiss Machining Capability for Copper
- Ø1–32 mm bar
- Slenderness without deflection
- Tolerance to ±0.003 mm
- High-volume small parts
Copper Material Data
| Density | 8.94 g/cm³ |
|---|---|
| Tensile strength | 220–350 MPa |
| Yield strength (0.2%) | 70–330 MPa |
| Hardness | 40–100 HV |
| Melting point | 1083 °C |
| Thermal conductivity | 391 W/m·K |
| Thermal expansion | 17.0 ×10⁻⁶/K |
| Electrical conductivity | 101% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C10100 OFE, C10200 OF, C11000 ETP, C14500 tellurium copper |
Published typical values for C11000 ETP. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It smears rather than cuts. Razor-sharp uncoated tooling and high rake; if the print allows it, C14500 tellurium copper machines four times better at ~90% IACS.
How CNC Swiss Machining Copper Works
The Copper bar or billet rotates in the spindle while single-point tools shape outer diameters, bores, faces, grooves and threads. Constant surface speed control keeps cutting conditions stable from large to small diameters.
We start from your supplied geometry and tolerance scheme. The setup is designed to minimise re-clamping, which protects positional accuracy across features. A first article is verified against the drawing before the balance of the batch is released.
Achievable Tolerances for CNC Swiss Machining Copper
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
Most Copper parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
CNC Swiss Machining Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Design Tips for CNC Swiss Machining Copper
Small design adjustments often cut cost and lead time. Consistent diameters, standard thread forms and avoiding extremely long, slender features help Copper turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Swiss Machining Tolerances & Surface Finish
Turned Copper holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Working with Copper
Copper is excellent electrical and thermal conductivity. We translate those properties into a process plan: the right tooling, speeds, feeds and fixturing for the alloy.
Where the grade, temper or heat-treat condition matters to performance, we confirm it with you and can supply material certificates. Material is procured to recognised standards for consistent, repeatable results.
Applications of CNC Swiss Machining Copper
Copper parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Swiss Machining Copper
Starting your project takes one email. Send your CAD or 2D drawing, the Copper grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Parts We Have Run in Copper
Three representative CNC Swiss Machining Copper jobs, with the callouts that actually drove the process plan. Yours will differ — these are here so you can judge whether your part is in our range before you spend time on an RFQ.
Precision shaft
- Material
- Copper
- Size
- Ø16 × 240 mm
- Key callouts
- OD h6, concentricity 0.01 mm TIR, keyway 5 H9
- Batch
- 1,000 pcs / year
Turned between centres so both journals share one datum.
Valve seat
- Material
- Copper
- Size
- Ø28 × 14 mm
- Key callouts
- Seat angle 45° ±0.1°, roundness 0.005 mm, Ra 0.2 µm
- Batch
- 800 pcs
Seat finished with a single-point diamond pass, no interruption.
Connector pin
- Material
- Copper
- Size
- Ø3.0 × 24 mm
- Key callouts
- OD ±0.005 mm, straightness 0.02 mm over length
- Batch
- 20,000 pcs
Swiss-turned from bar with a guide bushing; nothing else holds Ø3 mm over 24 mm.
Finishing Options for Copper
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Tin plate | 3–15 µm | Solderable, prevents oxidation |
| Silver plate | 2–10 µm | Lowest contact resistance for RF and power |
| Nickel underplate | 2–5 µm | Diffusion barrier under tin or gold |
| Gold flash | 0.05–1 µm | Contact surfaces, over nickel |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Swiss Machining Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Swiss Machining
Other Processes for Copper
Send the drawing, the Copper grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
Does CNC Swiss Machining Copper require dedicated tooling?
Most Copper turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Can VT machining make custom Copper parts to my drawing?
Yes. Copper Copper turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Swiss Machining Copper?
Achievable tolerances for Copper turning depend on the alloy, geometry and feature size. Turning holds diameter tolerances to around ±0.005 mm with concentricity within 0.01 mm. Exact figures are confirmed against your drawing callouts.
Why is Copper a good choice for CNC Swiss Machining?
Copper is excellent electrical and thermal conductivity, which makes it well suited to CNC Swiss Machining. We tune the process to the alloy so the finished Copper turning part meets your dimensional and functional requirements.