CNC Laser Cutting Stainless Steel is a core capability at VT machining. We combine controlled cutting with material-aware setup for Stainless Steel — an alloy that is corrosion resistant, strong, hygienic (304/316 grades) — to produce parts that meet your specification first time.
CNC Laser Cutting Capability for Stainless Steel
- Fiber 1–6 kW
- Kerf 0.1–0.3 mm
- Contour ±0.05 mm
- N₂/O₂ assist gas
Stainless Steel Material Data
| Density | 8.00 g/cm³ |
|---|---|
| Tensile strength | 515 MPa |
| Yield strength (0.2%) | 205 MPa |
| Hardness | 170 HB |
| Melting point | 1400–1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Thermal expansion | 17.3 ×10⁻⁶/K |
| Electrical conductivity | 2.4% |
| Machinability (C36000 = 100%) | 45% |
| Grades we run | 303, 304/304L, 316/316L, 321, 410, 416, 420, 17-4PH, 2205 duplex |
Published typical values for 304. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It work-hardens the moment a tool dwells. Constant feed and positive-rake tooling; a rubbing pass leaves a glazed skin the next tool cannot get through.
How CNC Laser Cutting Stainless Steel Works
A focused fibre-laser beam melts and blows material from the Stainless Steel sheet along the programmed contour. Power, focal position, nozzle stand-off and assist-gas pressure are tuned to the alloy and thickness for a clean, square edge.
Every job begins from your CAD model or 2D drawing. Fixturing and tool paths are planned so the most critical dimensions are produced in the most rigid, repeatable setup. Critical dimensions are checked on the first part and monitored through the run.
Achievable Tolerances for CNC Laser Cutting Stainless Steel
| Feature | Standard | Precision |
|---|---|---|
| Contour dimension | ±0.10 mm | ±0.05 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Kerf width | 0.20 mm | 0.10 mm |
| Squareness of cut edge | 0.5° | 0.2° |
| Heat-affected zone | 0.15 mm | 0.05 mm (N₂ assist) |
| Minimum hole diameter | 1.2 × thickness | 1.0 × thickness |
| Edge condition | light dross | burr-free, N₂ cut |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
We complete Stainless Steel components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Working with Stainless Steel
Stainless Steel offers a useful combination of properties: it is corrosion resistant, strong, hygienic (304/316 grades). Those characteristics shape how we approach laser cutting — from tool and parameter selection to work-holding and coolant.
If your application is sensitive to alloy condition, we agree the specification in writing and document it. Stock is sourced from reputable suppliers so what you order is what you receive.
CNC Laser Cutting Tolerances & Surface Finish
Laser-cut Stainless Steel holds contour tolerances around ±0.05 mm depending on thickness, with a narrow kerf and a clean, near burr-free edge.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
CNC Laser Cutting Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on Stainless Steel parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Design Tips for CNC Laser Cutting Stainless Steel
A few design choices make a real difference to cost and quality. Keeping holes no smaller than the material thickness, allowing for kerf, and grouping features sensibly improves edge quality and nesting yield on Stainless Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Laser Cutting Stainless Steel
CNC Laser Cutting of Stainless Steel supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Laser Cutting Stainless Steel
Ordering Stainless Steel parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Parts We Have Run in Stainless Steel
Three representative CNC Laser Cutting Stainless Steel jobs, with the callouts that actually drove the process plan. Yours will differ — these are here so you can judge whether your part is in our range before you spend time on an RFQ.
Gasket / shim set
- Material
- Stainless Steel
- Size
- Ø120 × 0.5 mm
- Key callouts
- ID/OD ±0.05 mm, no heat discolouration
- Batch
- 3,000 pcs
Small-diameter holes below 1.2 × thickness are punched, not lased.
Machine guard panel
- Material
- Stainless Steel
- Size
- 900 × 600 × 3 mm
- Key callouts
- Slot pattern ±0.10 mm, hole-to-edge 6 mm
- Batch
- 150 pcs
Cut with common-line pairs to halve the pierce count.
Bracket blank
- Material
- Stainless Steel
- Size
- 250 × 120 × 4 mm
- Key callouts
- Contour ±0.10 mm, bend-relief notches
- Batch
- 800 pcs
Bend reliefs cut in at the same time so the press brake does not tear the corner.
Finishing Options for Stainless Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Citric passivation | — | ASTM A967 / AMS 2700, removes free iron |
| Electropolish | 5–25 µm removed | Ra improves by roughly half, hygienic surface |
| Brushed / grained | Ra 0.4–1.6 µm | No. 4 finish, directional |
| PVD coating | 2–5 µm | TiN, TiCN for wear surfaces |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Laser Cutting Stainless Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Stainless Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Laser Cutting
Other Processes for Stainless Steel
Send the drawing, the Stainless Steel grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What is CNC Laser Cutting Stainless Steel and how is it done?
CNC Laser Cutting Stainless Steel refers to cNC fiber laser cutting follows a programmed path to cut sheet and plate with a clean, narrow kerf. Applied to Stainless Steel — corrosion resistant, strong, hygienic (304/316 grades) — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Can VT machining make custom Stainless Steel parts to my drawing?
Yes. Stainless Steel Stainless Steel cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Does CNC Laser Cutting Stainless Steel require dedicated tooling?
Most Stainless Steel cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What material thickness or size range suits CNC Laser Cutting Stainless Steel?
Laser-cut Stainless Steel thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
Which industries use CNC Laser Cutting Stainless Steel parts?
CNC Laser Cutting Stainless Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Stainless Steel components are required.
How clean are the edges produced by CNC Laser Cutting on Stainless Steel?
Laser cutting leaves Stainless Steel with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.