VT machining offers CNC Turning for MIC-6 Aluminum (Cast aluminium tooling plate (Al-Si-Mg type)), typically supplied cast & stress-relieved. Cast and precision-milled plate with very low internal stress, so it stays flat after machining.
CNC Turning Notes for MIC-6 Aluminum
MIC-6 Aluminum turns with good chip control at standard cutting data.
For estimating, a 100 × 100 × 10 mm block of MIC-6 Aluminum weighs about 0.27 kg.
Starting Parameters for CNC Turning MIC-6 Aluminum
| Cutting speed (carbide) | 320-800 m/min |
|---|---|
| Feed | 0.1-0.4 mm/rev |
| Spindle speed, Ø25 mm bar | 4070-10190 rpm |
| Insert / tool class | ISO N — sharp, polished, uncoated or DLC |
| Coolant | Emulsion or MQL; polished uncoated or DLC tools |
Starting values for MIC-6 Aluminum, Cast & stress-relieved; optimised on the first article.
MIC-6 Aluminum Data Relevant to CNC Turning
| Equivalent designations | Cast aluminium tooling plate (Al-Si-Mg type) |
|---|---|
| Key composition | Cast Al-Si-Mg |
| Typical supply condition | Cast & stress-relieved |
| Hardness (typical) | ~65 HB |
Typical values; we work to your drawing and mill certificate.
How MIC-6 Aluminum Differs
Cast and precision-milled plate with very low internal stress, so it stays flat after machining.
Typical applications: Fixture plates, inspection bases, jigs.
MIC-6 Aluminum vs Similar Grades
| MIC-6 Aluminum | 7075 Aluminum | 7050 Aluminum | 6082 Aluminum | |
|---|---|---|---|---|
| Key composition | Cast Al-Si-Mg | Zn 5.1-6.1%, Mg 2.1-2.9%, Cu 1.2-2% | Zn 5.7-6.7%, Cu 2-2.6%, Mg 1.9-2.6% | Si 0.7-1.3%, Mg 0.6-1.2%, Mn |
| Hardness | ~65 HB | ~150 HB | ~140 HB | ~95 HB |
| Tensile (MPa) | ~165 | ~570 | ~510 | ~310 |
| Typical use | Fixture plates, inspection bases, jigs | Aerospace, molds, high-stress fittings | Aerospace bulkheads, wing skins, thick-plate parts | Structural parts, machined plate, fixtures |
More on CNC Turning Aluminum
Finishing options, quality documentation and general cnc turning guidance for all aluminum grades are on our CNC Turning Aluminum page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Turning MIC-6 Aluminum
Send a STEP/IGES model or PDF drawing, confirm MIC-6 Aluminum and its condition (we usually see it supplied cast & stress-relieved), the quantity, critical tolerances and any finish or certificate requirements.
MIC-6 Aluminum in Other Processes
Related
Send the drawing, the MIC-6 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Which industries use CNC Turning MIC-6 Aluminum parts?
CNC Turning MIC-6 Aluminum parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise MIC-6 Aluminum components are required.
What material thickness or size range suits CNC Turning MIC-6 Aluminum?
Turned MIC-6 Aluminum parts are produced from bar or chuck stock across a wide diameter range.
Can VT machining make custom MIC-6 Aluminum parts to my drawing?
Yes. MIC-6 Aluminum turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What is the typical lead time and minimum order for CNC Turning MIC-6 Aluminum?
CNC Turning prototypes for MIC-6 Aluminum can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is MIC-6 Aluminum a good choice for CNC Turning?
MIC-6 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Turning. We tune the process to the alloy so the finished MIC-6 Aluminum turning part meets your dimensional and functional requirements.
Does CNC Turning MIC-6 Aluminum require dedicated tooling?
Most MIC-6 Aluminum turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.