VT machining provides CNC Thread Grinding MIC-6 Aluminum for customers who need accurate, repeatable MIC-6 Aluminum components. The machinability of MIC-6 Aluminum is excellent; high cutting speeds and superb finishes achievable, so we set the operation up specifically for this grade.
CNC Thread Grinding Capability for MIC-6 Aluminum
- Lightweight (~2.7 g/cm³)
- Excellent machinability
- Tolerance to ±0.01 mm
- Anodising-ready
MIC-6 Aluminum Material Data
| Density | 2.70 g/cm³ |
|---|---|
| Tensile strength | 310 MPa |
| Yield strength (0.2%) | 276 MPa |
| Hardness | 95 HB |
| Melting point | 582–652 °C |
| Thermal conductivity | 167 W/m·K |
| Thermal expansion | 23.6 ×10⁻⁶/K |
| Electrical conductivity | 43% |
| Machinability (C36000 = 100%) | 190% |
| Grades we run | 6061, 6082, 6063, 7075-T6, 5052, 2024-T3, MIC-6 cast plate |
Published typical values for 6061-T6. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Thin walls relax after roughing. We rough, let the part stabilise, then finish — otherwise a 1.5 mm wall bows by more than the tolerance it was cut to.
Machining MIC-6 Aluminum with CNC Thread Grinding
The machinability of MIC-6 Aluminum is excellent; high cutting speeds and superb finishes achievable. For CNC Thread Grinding we select tooling, feeds, speeds and coolant to match, keeping the MIC-6 Aluminum workpiece stable and the result accurate.
Because we machine MIC-6 Aluminum regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Thread Grinding MIC-6 Aluminum
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Thread Grinding MIC-6 Aluminum
A few design choices make a real difference to cost and quality. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on MIC-6 Aluminum efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
We complete MIC-6 Aluminum components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
CNC Thread Grinding Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on MIC-6 Aluminum parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Why MIC-6 Aluminum?
Specifying MIC-6 Aluminum for CNC Thread Grinding MIC-6 Aluminum is usually about its properties: lightweight with excellent machinability. Tell us the condition you need and we machine to it.
CNC Thread Grinding Tolerances & Surface Finish
Ground MIC-6 Aluminum reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC Thread Grinding MIC-6 Aluminum
CNC Thread Grinding of MIC-6 Aluminum supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Thread Grinding MIC-6 Aluminum
Ordering MIC-6 Aluminum parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for MIC-6 Aluminum
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Clear anodise (Type II) | 5–25 µm | Corrosion protection, keeps the natural colour |
| Colour anodise | 10–25 µm | Black, red, blue, gold; add 0.02 mm to close tolerances |
| Hard anodise (Type III) | 25–50 µm | 60–70 HRC surface, grows 50% into the part |
| Chromate / Alodine 1200 | < 1 µm | Conductive, meets MIL-DTL-5541 |
| Powder coat | 60–120 µm | RAL colours, needs 0.3 mm clearance on mating features |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Thread Grinding MIC-6 Aluminum
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact MIC-6 Aluminum grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
MIC-6 Aluminum in Other Processes
Related
Send the drawing, the MIC-6 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is CNC Thread Grinding MIC-6 Aluminum and how is it done?
CNC Thread Grinding MIC-6 Aluminum refers to thread grinding produces precise, high-finish threads on hardened parts and lead screws. Applied to MIC-6 Aluminum — lightweight with excellent machinability — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What tolerances can you hold for CNC Thread Grinding MIC-6 Aluminum?
Achievable tolerances for MIC-6 Aluminum grinding depend on the alloy, geometry and feature size. Grinding routinely holds single-micron tolerances on diameter, flatness and parallelism. Exact figures are confirmed against your drawing callouts.
What is the typical lead time and minimum order for CNC Thread Grinding MIC-6 Aluminum?
CNC Thread Grinding prototypes for MIC-6 Aluminum can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Which industries use CNC Thread Grinding MIC-6 Aluminum parts?
CNC Thread Grinding MIC-6 Aluminum parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise MIC-6 Aluminum components are required.
Does CNC Thread Grinding MIC-6 Aluminum require dedicated tooling?
Most MIC-6 Aluminum grinding work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Can VT machining make custom MIC-6 Aluminum parts to my drawing?
Yes. MIC-6 Aluminum MIC-6 Aluminum grinding is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.