CNC Surface Grinding C110 Copper is part of VT machining's grade-specific capability. C110 Copper is excellent electrical and thermal conductivity, and we combine controlled grinding with material-aware setup to produce parts that meet your specification.
CNC Surface Grinding Capability for C110 Copper
- Excellent conductivity
- Thermal management
- Tolerance to ±0.02 mm
- Solderable
C110 Copper Material Data
| Density | 8.94 g/cm³ |
|---|---|
| Tensile strength | 220–350 MPa |
| Yield strength (0.2%) | 70–330 MPa |
| Hardness | 40–100 HV |
| Melting point | 1083 °C |
| Thermal conductivity | 391 W/m·K |
| Thermal expansion | 17.0 ×10⁻⁶/K |
| Electrical conductivity | 101% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C10100 OFE, C10200 OF, C11000 ETP, C14500 tellurium copper |
Published typical values for C11000 ETP. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It smears rather than cuts. Razor-sharp uncoated tooling and high rake; if the print allows it, C14500 tellurium copper machines four times better at ~90% IACS.
Machining C110 Copper with CNC Surface Grinding
When grinding C110 Copper, machinability is moderate; gummy, so sharp tooling and coolant are used. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for C110 Copper mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Surface Grinding C110 Copper
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Surface Grinding C110 Copper
Small design adjustments often cut cost and lead time. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on C110 Copper efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
Why C110 Copper?
Customers select C110 Copper for CNC Surface Grinding because it is excellent electrical and thermal conductivity. We handle grade verification and any required heat treatment or finishing.
Secondary Operations & Finishing
Most C110 Copper parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
CNC Surface Grinding Tolerances & Surface Finish
Ground C110 Copper reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
CNC Surface Grinding Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Applications of CNC Surface Grinding C110 Copper
C110 Copper parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Surface Grinding C110 Copper
Starting your project takes one email. Send your CAD or 2D drawing, the C110 Copper grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for C110 Copper
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Tin plate | 3–15 µm | Solderable, prevents oxidation |
| Silver plate | 2–10 µm | Lowest contact resistance for RF and power |
| Nickel underplate | 2–5 µm | Diffusion barrier under tin or gold |
| Gold flash | 0.05–1 µm | Contact surfaces, over nickel |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Surface Grinding C110 Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C110 Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C110 Copper in Other Processes
Related
Send the drawing, the C110 Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom C110 Copper parts to my drawing?
Yes. C110 Copper C110 Copper grinding is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Surface Grinding C110 Copper?
Achievable tolerances for C110 Copper grinding depend on the alloy, geometry and feature size. Grinding routinely holds single-micron tolerances on diameter, flatness and parallelism. Exact figures are confirmed against your drawing callouts.
What material thickness or size range suits CNC Surface Grinding C110 Copper?
We machine C110 Copper across a broad size range; share your part envelope for confirmation.
Why is C110 Copper a good choice for CNC Surface Grinding?
C110 Copper is excellent electrical and thermal conductivity, which makes it well suited to CNC Surface Grinding. We tune the process to the alloy so the finished C110 Copper grinding part meets your dimensional and functional requirements.