Need reliable CNC Honing Incoloy 800? VT machining machines Incoloy 800 to tight tolerances and consistent quality. As a material, Incoloy 800 is high-temperature strength and oxidation resistance; we adapt feeds, speeds and tooling to suit.
CNC Honing Capability for Incoloy 800
- High-temperature strength
- Oxidation resistant
- Tolerance to ±0.01 mm
- Aerospace-grade
Incoloy 800 Material Data
| Density | 8.19 g/cm³ |
|---|---|
| Tensile strength | 1375 MPa |
| Yield strength (0.2%) | 1100 MPa |
| Hardness | 36–44 HRC |
| Melting point | 1260–1336 °C |
| Thermal conductivity | 11.4 W/m·K |
| Thermal expansion | 13.0 ×10⁻⁶/K |
| Electrical conductivity | 1.4% |
| Machinability (C36000 = 100%) | 12–15% |
| Grades we run | 600, 625, 718, X-750, 725 |
Published typical values for Inconel 718 (aged). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Tool life is measured in minutes, not hours. Ceramic or coated-carbide tooling, low surface speed, high pressure coolant, and a scheduled tool change rather than waiting for failure.
Machining Incoloy 800 with CNC Honing
When finishing Incoloy 800, machinability is very difficult; rigid setups, carbide/ceramic tooling, low speeds. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for Incoloy 800 mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Honing Incoloy 800
| Feature | Standard | Precision |
|---|---|---|
| Surface roughness | Ra 0.8 µm | Ra 0.05 µm |
| Edge break | 0.1–0.3 mm | 0.05 ±0.02 mm |
| Material removed | 0.02 mm | 0.005 mm |
| Bore roundness after honing | 0.005 mm | 0.002 mm |
| Cross-hatch angle | 45° ±10° | 45° ±5° |
| Cosmetic grade | uniform satin | mirror, no visible lines |
| Masking of datum faces | on request | standard |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Honing Incoloy 800
Small design adjustments often cut cost and lead time. Telling us the target Ra, the cosmetic faces and any masking needs lets us finish Incoloy 800 efficiently without over-processing. If you send your model early, we will return practical DFM feedback before you commit to production.
Why Incoloy 800?
Customers select Incoloy 800 for CNC Honing because it is high-temperature strength and oxidation resistance. We handle grade verification and any required heat treatment or finishing.
Secondary Operations & Finishing
Most Incoloy 800 parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
CNC Honing Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
CNC Honing Tolerances & Surface Finish
Finishing brings Incoloy 800 to a defined roughness target — from a uniform satin to Ra values as low as 0.05 µm — with controlled, repeatable edge breaks.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Applications of CNC Honing Incoloy 800
Incoloy 800 parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Honing Incoloy 800
Starting your project takes one email. Send your CAD or 2D drawing, the Incoloy 800 grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for Incoloy 800
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Honing Incoloy 800
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Incoloy 800 grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Incoloy 800 in Other Processes
Related
Send the drawing, the Incoloy 800 condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Honing Incoloy 800?
Achievable tolerances for Incoloy 800 finishing depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
How clean are the edges produced by CNC Honing on Incoloy 800?
Our deburring leaves Incoloy 800 with a consistent, controlled edge break and burr-free surfaces.
What material thickness or size range suits CNC Honing Incoloy 800?
We machine Incoloy 800 across a broad size range; share your part envelope for confirmation.
What surface finish is achievable on Incoloy 800 with CNC Honing?
Our finishing processes refine Incoloy 800 surfaces to Ra values as low as 0.05 µm for cosmetic or sealing faces.