CNC Boring P20 Mold Steel from VT machining delivers precision P20 Mold Steel parts made to your exact drawing. Boring enlarges and finishes existing holes to precise diameter, roundness and surface finish, with parameters tuned to P20 Mold Steel, which is mold-grade, polishable and hardenable.
CNC Boring Capability for P20 Mold Steel
- Mold-grade cleanliness
- Polishable to mirror finish
- Hardenable to 48–54 HRC
- Tolerance to ±0.005 mm
P20 Mold Steel Material Data
| Density | 14.5 g/cm³ |
|---|---|
| Tensile strength | 2000–3500 (TRS) MPa |
| Yield strength (0.2%) | — |
| Hardness | 88–93 HRA / 1300–1800 HV |
| Melting point | 2870 (WC) °C |
| Thermal conductivity | 70–100 W/m·K |
| Thermal expansion | 5.0 ×10⁻⁶/K |
| Electrical conductivity | 10% |
| Machinability (C36000 = 100%) | grind / EDM only |
| Grades we run | YG6, YG8, YG15 (K10–K30), D2, H13, M2, SKD11 |
Published typical values for WC-Co (YG8 / K20). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Everything is done by grinding, wire EDM or sinker EDM. Design in a small corner radius wherever possible — a true sharp internal corner doubles the EDM time.
Machining P20 Mold Steel with CNC Boring
When turning P20 Mold Steel, machinability is pre-hardened or machined-then-hardened; polishes to high finish for molds. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for P20 Mold Steel mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Boring P20 Mold Steel
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Boring Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Secondary Operations & Finishing
Most P20 Mold Steel parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
Design Tips for CNC Boring P20 Mold Steel
Small design adjustments often cut cost and lead time. Consistent diameters, standard thread forms and avoiding extremely long, slender features help P20 Mold Steel turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Boring Tolerances & Surface Finish
Turned P20 Mold Steel holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Why P20 Mold Steel?
Customers select P20 Mold Steel for CNC Boring because it is mold-grade, polishable and hardenable. We handle grade verification and any required heat treatment or finishing.
Applications of CNC Boring P20 Mold Steel
P20 Mold Steel parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Boring P20 Mold Steel
Starting your project takes one email. Send your CAD or 2D drawing, the P20 Mold Steel grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for P20 Mold Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Boring P20 Mold Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact P20 Mold Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
P20 Mold Steel in Other Processes
Related
Send the drawing, the P20 Mold Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What surface finish is achievable on P20 Mold Steel with CNC Boring?
Surface finish on P20 Mold Steel is controlled to your specification; we confirm the achievable Ra against your callout.
What is CNC Boring P20 Mold Steel and how is it done?
CNC Boring P20 Mold Steel refers to boring enlarges and finishes existing holes to precise diameter, roundness and surface finish. Applied to P20 Mold Steel — mold-grade, polishable and hardenable — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Which industries use CNC Boring P20 Mold Steel parts?
CNC Boring P20 Mold Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise P20 Mold Steel components are required.
What material thickness or size range suits CNC Boring P20 Mold Steel?
Turned P20 Mold Steel parts are produced from bar or chuck stock across a wide diameter range.