CNC Boring Inconel is a core capability at VT machining. We combine controlled turning with material-aware setup for Inconel — an alloy that is high-temperature strength and oxidation resistance — to produce parts that meet your specification first time.
CNC Boring Capability for Inconel
- Bore tolerance to IT6
- Roundness within 0.005 mm
- Fine boring heads
- Large-diameter capability
Inconel Material Data
| Density | 8.19 g/cm³ |
|---|---|
| Tensile strength | 1375 MPa |
| Yield strength (0.2%) | 1100 MPa |
| Hardness | 36–44 HRC |
| Melting point | 1260–1336 °C |
| Thermal conductivity | 11.4 W/m·K |
| Thermal expansion | 13.0 ×10⁻⁶/K |
| Electrical conductivity | 1.4% |
| Machinability (C36000 = 100%) | 12–15% |
| Grades we run | 600, 625, 718, X-750, 725 |
Published typical values for Inconel 718 (aged). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Tool life is measured in minutes, not hours. Ceramic or coated-carbide tooling, low surface speed, high pressure coolant, and a scheduled tool change rather than waiting for failure.
How CNC Boring Inconel Works
The Inconel bar or billet rotates in the spindle while single-point tools shape outer diameters, bores, faces, grooves and threads. Constant surface speed control keeps cutting conditions stable from large to small diameters.
Programming is driven directly by your 3D model or print. Work-holding, tool selection and the cutting strategy are planned around the critical features and the material before the first chip is cut. First-off inspection confirms the process is centred before production continues.
Achievable Tolerances for CNC Boring Inconel
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
Finished Inconel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Working with Inconel
As a material, Inconel is high-temperature strength and oxidation resistance. Our setup reflects the alloy's machinability so the finished part is accurate and free of avoidable defects.
We verify the exact grade and condition before machining, and traceable mill certs are available on request. We can work to your nominated material source or specification when required.
CNC Boring Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every Inconel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Design Tips for CNC Boring Inconel
We are happy to suggest design tweaks that improve manufacturability. Consistent diameters, standard thread forms and avoiding extremely long, slender features help Inconel turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Boring Tolerances & Surface Finish
Turned Inconel holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Applications of CNC Boring Inconel
Customers order CNC Boring Inconel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Boring Inconel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Parts We Have Run in Inconel
Three representative CNC Boring Inconel jobs, with the callouts that actually drove the process plan. Yours will differ — these are here so you can judge whether your part is in our range before you spend time on an RFQ.
Nozzle body
- Material
- Inconel
- Size
- Ø12 × 46 mm
- Key callouts
- Ø0.6 mm orifice ±0.01 mm, internal taper 20°
- Batch
- 600 pcs
Orifice EDM-drilled after turning; a drill wanders at that diameter.
Bearing spacer
- Material
- Inconel
- Size
- Ø35 / Ø22 × 9 mm
- Key callouts
- Thickness ±0.005 mm, parallelism 0.005 mm
- Batch
- 4,000 pcs
Turned then double-disc ground — thickness this tight is not a lathe job.
Precision shaft
- Material
- Inconel
- Size
- Ø16 × 240 mm
- Key callouts
- OD h6, concentricity 0.01 mm TIR, keyway 5 H9
- Batch
- 1,000 pcs / year
Turned between centres so both journals share one datum.
Finishing Options for Inconel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Boring Inconel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Inconel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Boring
Other Processes for Inconel
Send the drawing, the Inconel grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Boring Inconel?
CNC Boring prototypes for Inconel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is Inconel a good choice for CNC Boring?
Inconel is high-temperature strength and oxidation resistance, which makes it well suited to CNC Boring. We tune the process to the alloy so the finished Inconel turning part meets your dimensional and functional requirements.
Which industries use CNC Boring Inconel parts?
CNC Boring Inconel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Inconel components are required.
What is CNC Boring Inconel and how is it done?
CNC Boring Inconel refers to boring enlarges and finishes existing holes to precise diameter, roundness and surface finish. Applied to Inconel — high-temperature strength and oxidation resistance — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Does CNC Boring Inconel require dedicated tooling?
Most Inconel turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.