VT machining offers CNC Wire EDM for SKD11 Tool Steel (JIS G4404 / ~D2 / 1.2379), typically supplied annealed or hardened. Japanese equivalent of D2.
CNC Wire EDM Notes for SKD11 Tool Steel
Wire EDM cuts SKD11 Tool Steel after final hardening, so profiles hold size without heat-treat distortion.
Process Data for CNC Wire EDM SKD11 Tool Steel
| Area cutting rate (0.25 mm brass wire) | ~140 mm²/min |
|---|---|
| Linear speed at 10 mm thick | ~14 mm/min |
| Linear speed at 30 mm thick | ~4.7 mm/min |
| Linear speed at 60 mm thick | ~2.3 mm/min |
| Achievable accuracy | ±0.005 mm with 3-4 skim passes; Ra 0.4-0.8 µm |
Typical values for SKD11 Tool Steel, Annealed or hardened; confirmed on the first part.
SKD11 Tool Steel Data Relevant to CNC Wire EDM
| Equivalent designations | JIS G4404 / ~D2 / 1.2379 |
|---|---|
| Hardness (typical) | 58-62 HRC hardened |
| Density | 7.7 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Wire EDM Alloy Steel
Finishing options, quality documentation and general cnc wire edm guidance for all alloy steel grades are on our CNC Wire EDM Alloy Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Wire EDM SKD11 Tool Steel
Send a STEP/IGES model or PDF drawing, confirm SKD11 Tool Steel and its condition (we usually see it supplied annealed or hardened), the quantity, critical tolerances and any finish or certificate requirements.
SKD11 Tool Steel in Other Processes
Related
Send the drawing, the SKD11 Tool Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom SKD11 Tool Steel parts to my drawing?
Yes. SKD11 Tool Steel EDM machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Why is SKD11 Tool Steel a good choice for CNC Wire EDM?
SKD11 Tool Steel is wear-resistant and hardenable for tooling, which makes it well suited to CNC Wire EDM. We tune the process to the alloy so the finished SKD11 Tool Steel EDM machining part meets your dimensional and functional requirements.
What surface finish is achievable on SKD11 Tool Steel with CNC Wire EDM?
Surface finish on SKD11 Tool Steel is controlled to your specification; we confirm the achievable Ra against your callout.
Does CNC Wire EDM SKD11 Tool Steel require dedicated tooling?
Wire EDM needs no shaped tooling; sinker EDM uses a shaped electrode we produce in-house for your cavity.
What is CNC Wire EDM SKD11 Tool Steel and how is it done?
CNC Wire EDM SKD11 Tool Steel refers to wire EDM cuts conductive metal with a charged wire, achieving fine detail and tight tolerance with no cutting force. Applied to SKD11 Tool Steel — wear-resistant and hardenable for tooling — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
