CNC Wire EDM H13 Tool Steel is part of VT machining's grade-specific capability. H13 Tool Steel is wear-resistant and hardenable for tooling, and we combine controlled EDM machining with material-aware setup to produce parts that meet your specification.
CNC Wire EDM Capability for H13 Tool Steel
- Air/oil/water-hardening grades
- High wear resistance
- Hardenable to 58–64 HRC
- Tolerance to ±0.005 mm
Machining H13 Tool Steel with CNC Wire EDM
The machinability of H13 Tool Steel is machined in the annealed state, then hardened; carbide tooling preferred. For CNC Wire EDM we select tooling, feeds, speeds and coolant to match, keeping the H13 Tool Steel workpiece stable and the result accurate.
Because we machine H13 Tool Steel regularly, proven settings shorten setup and keep quality repeatable across reorders.
CNC Wire EDM Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on H13 Tool Steel parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
CNC Wire EDM Tolerances & Surface Finish
EDM holds tolerances to roughly ±0.002–0.005 mm with no cutting force on the H13 Tool Steel part, producing fine, controlled surface textures and sharp internal corners impossible to mill.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Secondary Operations & Finishing
We complete H13 Tool Steel components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Why H13 Tool Steel?
Specifying H13 Tool Steel for CNC Wire EDM H13 Tool Steel is usually about its properties: wear-resistant and hardenable for tooling. Tell us the condition you need and we machine to it.
Design Tips for CNC Wire EDM H13 Tool Steel
A few design choices make a real difference to cost and quality. EDM suits sharp internal corners, thin ribs and hardened H13 Tool Steel that cannot be milled; allowing a small corner radius where possible speeds the cut. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Wire EDM H13 Tool Steel
CNC Wire EDM of H13 Tool Steel supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Wire EDM H13 Tool Steel
Ordering H13 Tool Steel parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
H13 Tool Steel in Other Processes
Related
Need CNC Wire EDM H13 Tool Steel for your project? Send your drawing and quantity for a fast quotation.
Request a QuoteFrequently Asked Questions
Does CNC Wire EDM H13 Tool Steel require dedicated tooling?
Wire EDM needs no shaped tooling; sinker EDM uses a shaped electrode we produce in-house for your cavity.
What surface finish is achievable on H13 Tool Steel with CNC Wire EDM?
Surface finish on H13 Tool Steel is controlled to your specification; we confirm the achievable Ra against your callout.
What is the typical lead time and minimum order for CNC Wire EDM H13 Tool Steel?
CNC Wire EDM prototypes for H13 Tool Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What is CNC Wire EDM H13 Tool Steel and how is it done?
CNC Wire EDM H13 Tool Steel refers to wire EDM cuts conductive metal with a charged wire, achieving fine detail and tight tolerance with no cutting force. Applied to H13 Tool Steel — wear-resistant and hardenable for tooling — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Can VT machining make custom H13 Tool Steel parts to my drawing?
Yes. H13 Tool Steel H13 Tool Steel EDM machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Wire EDM H13 Tool Steel?
Achievable tolerances for H13 Tool Steel EDM machining depend on the alloy, geometry and feature size. EDM holds tolerances to around ±0.002 mm with no cutting force on the part. Exact figures are confirmed against your drawing callouts.