VT machining specialises in CNC Milling H13 Tool Steel. Because H13 Tool Steel is wear-resistant and hardenable for tooling, and its machinability is machined in the annealed state, then hardened; carbide tooling preferred, we plan each job around the grade to protect accuracy and surface quality.
CNC Milling Capability for H13 Tool Steel
- Air/oil/water-hardening grades
- High wear resistance
- Hardenable to 58–64 HRC
- Tolerance to ±0.005 mm
H13 Tool Steel Material Data
| Density | 14.5 g/cm³ |
|---|---|
| Tensile strength | 2000–3500 (TRS) MPa |
| Yield strength (0.2%) | — |
| Hardness | 88–93 HRA / 1300–1800 HV |
| Melting point | 2870 (WC) °C |
| Thermal conductivity | 70–100 W/m·K |
| Thermal expansion | 5.0 ×10⁻⁶/K |
| Electrical conductivity | 10% |
| Machinability (C36000 = 100%) | grind / EDM only |
| Grades we run | YG6, YG8, YG15 (K10–K30), D2, H13, M2, SKD11 |
Published typical values for WC-Co (YG8 / K20). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Everything is done by grinding, wire EDM or sinker EDM. Design in a small corner radius wherever possible — a true sharp internal corner doubles the EDM time.
Machining H13 Tool Steel with CNC Milling
H13 Tool Steel behaves predictably under CNC Milling once parameters are dialled in: machinability is machined in the annealed state, then hardened; carbide tooling preferred, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of H13 Tool Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Milling H13 Tool Steel
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why H13 Tool Steel?
H13 Tool Steel is chosen when a part needs what this grade offers — it is wear-resistant and hardenable for tooling. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Milling Tolerances & Surface Finish
For CNC Milling, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Secondary Operations & Finishing
Finished H13 Tool Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Milling Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every H13 Tool Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Design Tips for CNC Milling H13 Tool Steel
We are happy to suggest design tweaks that improve manufacturability. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in H13 Tool Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Milling H13 Tool Steel
Customers order CNC Milling H13 Tool Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Milling H13 Tool Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for H13 Tool Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Milling H13 Tool Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact H13 Tool Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
H13 Tool Steel in Other Processes
Related
Send the drawing, the H13 Tool Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Milling H13 Tool Steel?
We machine H13 Tool Steel across a broad size range; share your part envelope for confirmation.
Which industries use CNC Milling H13 Tool Steel parts?
CNC Milling H13 Tool Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise H13 Tool Steel components are required.
What tolerances can you hold for CNC Milling H13 Tool Steel?
Achievable tolerances for H13 Tool Steel machining depend on the alloy, geometry and feature size. Milling holds positional and dimensional tolerances to around ±0.01 mm, tighter with precision setups. Exact figures are confirmed against your drawing callouts.
Does CNC Milling H13 Tool Steel require dedicated tooling?
Most H13 Tool Steel machining work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What is CNC Milling H13 Tool Steel and how is it done?
CNC Milling H13 Tool Steel refers to multi-axis milling cutters remove material to produce prismatic features, pockets, slots and contoured 3D surfaces. Applied to H13 Tool Steel — wear-resistant and hardenable for tooling — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.