Need reliable CNC Turning H13 Tool Steel? VT machining machines H13 Tool Steel to tight tolerances and consistent quality. As a material, H13 Tool Steel is wear-resistant and hardenable for tooling; we adapt feeds, speeds and tooling to suit.
CNC Turning Capability for H13 Tool Steel
- Air/oil/water-hardening grades
- High wear resistance
- Hardenable to 58–64 HRC
- Tolerance to ±0.005 mm
H13 Tool Steel Material Data
| Density | 14.5 g/cm³ |
|---|---|
| Tensile strength | 2000–3500 (TRS) MPa |
| Yield strength (0.2%) | — |
| Hardness | 88–93 HRA / 1300–1800 HV |
| Melting point | 2870 (WC) °C |
| Thermal conductivity | 70–100 W/m·K |
| Thermal expansion | 5.0 ×10⁻⁶/K |
| Electrical conductivity | 10% |
| Machinability (C36000 = 100%) | grind / EDM only |
| Grades we run | YG6, YG8, YG15 (K10–K30), D2, H13, M2, SKD11 |
Published typical values for WC-Co (YG8 / K20). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Everything is done by grinding, wire EDM or sinker EDM. Design in a small corner radius wherever possible — a true sharp internal corner doubles the EDM time.
Machining H13 Tool Steel with CNC Turning
H13 Tool Steel behaves predictably under CNC Turning once parameters are dialled in: machinability is machined in the annealed state, then hardened; carbide tooling preferred, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of H13 Tool Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Turning H13 Tool Steel
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Turning H13 Tool Steel
We are happy to suggest design tweaks that improve manufacturability. Consistent diameters, standard thread forms and avoiding extremely long, slender features help H13 Tool Steel turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Finished H13 Tool Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Turning Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every H13 Tool Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
CNC Turning Tolerances & Surface Finish
Turned H13 Tool Steel holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Why H13 Tool Steel?
H13 Tool Steel is chosen when a part needs what this grade offers — it is wear-resistant and hardenable for tooling. We confirm the grade and any temper or heat-treat condition with you before machining.
Applications of CNC Turning H13 Tool Steel
Customers order CNC Turning H13 Tool Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Turning H13 Tool Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for H13 Tool Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Turning H13 Tool Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact H13 Tool Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
H13 Tool Steel in Other Processes
Related
Send the drawing, the H13 Tool Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Turning H13 Tool Steel?
Turned H13 Tool Steel parts are produced from bar or chuck stock across a wide diameter range.
What is CNC Turning H13 Tool Steel and how is it done?
CNC Turning H13 Tool Steel refers to cNC turning rotates the workpiece against a single-point tool to produce cylindrical features, threads and grooves. Applied to H13 Tool Steel — wear-resistant and hardenable for tooling — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Does CNC Turning H13 Tool Steel require dedicated tooling?
Most H13 Tool Steel turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
How clean are the edges produced by CNC Turning on H13 Tool Steel?
Machined H13 Tool Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What is the typical lead time and minimum order for CNC Turning H13 Tool Steel?
CNC Turning prototypes for H13 Tool Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.