CNC Turning 4130 Alloy Steel

VT machining offers CNC Turning for 4130 Alloy Steel (UNS G41300 / 25CrMo4 / SCM430), typically supplied normalised or Q&T. Chromoly with good weldability; widely used in aerospace and motorsport tubing.

CNC Turning Notes for 4130 Alloy Steel

4130 Alloy Steel turns with good chip control at standard cutting data.

For estimating, a 100 × 100 × 10 mm block of 4130 Alloy Steel weighs about 0.79 kg.

Starting Parameters for CNC Turning 4130 Alloy Steel

Cutting speed (carbide)135-225 m/min
Feed0.1-0.3 mm/rev
Spindle speed, Ø25 mm bar1720-2860 rpm
Insert / tool classISO P — CVD-coated carbide
CoolantEmulsion (6-8%)

Starting values for 4130 Alloy Steel, Normalised or Q&T; optimised on the first article.

4130 Alloy Steel Data Relevant to CNC Turning

Equivalent designationsUNS G41300 / 25CrMo4 / SCM430
Key compositionC 0.28-0.33%, Cr 0.8-1.1%, Mo 0.15-0.25%
Typical supply conditionNormalised or Q&T
Hardness (typical)~18-30 HRC
Machinability rating70% (AISI B1112 = 100%)

Typical values; we work to your drawing and mill certificate.

How 4130 Alloy Steel Differs

Chromoly with good weldability; widely used in aerospace and motorsport tubing.

Typical applications: Aircraft tubing, roll cages, fittings.

4130 Alloy Steel vs Similar Grades

4130 Alloy Steel4140 Alloy Steel4142 Alloy Steel4340 Alloy Steel
Key compositionC 0.28-0.33%, Cr 0.8-1.1%, Mo 0.15-0.25%C 0.38-0.43%, Cr 0.8-1.1%, Mo 0.15-0.25%C 0.40-0.45%, Cr 0.8-1.1%, Mo 0.15-0.25%C 0.38-0.43%, Ni 1.65-2%, Cr 0.7-0.9%, Mo
Hardness~18-30 HRC~197 HB annealed; 28-32 HRC pre-hard~28-32 HRC~30-50 HRC Q&T
Tensile (MPa)~670-900~655-1000~965~745 annealed; up to ~1800
Machinability %70666257
Typical useAircraft tubing, roll cages, fittingsShafts, gears, tooling, spindlesDie holders, shafts, toolingAircraft landing gear, crankshafts, heavy shafts

More on CNC Turning Alloy Steel

Finishing options, quality documentation and general cnc turning guidance for all alloy steel grades are on our CNC Turning Alloy Steel page.

Quoting CNC Turning 4130 Alloy Steel

Send a STEP/IGES model or PDF drawing, confirm 4130 Alloy Steel and its condition (we usually see it supplied normalised or Q&T), the quantity, critical tolerances and any finish or certificate requirements.

4130 Alloy Steel in Other Processes

Related

Send the drawing, the 4130 Alloy Steel condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

What tolerances can you hold for CNC Turning 4130 Alloy Steel?

Achievable tolerances for 4130 Alloy Steel turning depend on the alloy, geometry and feature size. Turning holds diameter tolerances to around ±0.005 mm with concentricity within 0.01 mm. Exact figures are confirmed against your drawing callouts.

Can VT machining make custom 4130 Alloy Steel parts to my drawing?

Yes. 4130 Alloy Steel turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.

Which industries use CNC Turning 4130 Alloy Steel parts?

CNC Turning 4130 Alloy Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise 4130 Alloy Steel components are required.

Why is 4130 Alloy Steel a good choice for CNC Turning?

4130 Alloy Steel is high-strength and hardenable, which makes it well suited to CNC Turning. We tune the process to the alloy so the finished 4130 Alloy Steel turning part meets your dimensional and functional requirements.

What is the typical lead time and minimum order for CNC Turning 4130 Alloy Steel?

CNC Turning prototypes for 4130 Alloy Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.

How clean are the edges produced by CNC Turning on 4130 Alloy Steel?

Machined 4130 Alloy Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.