VT machining offers CNC Turning for 4340 Alloy Steel (UNS G43400 / 34CrNiMo6 / SNCM439), typically supplied annealed or Q&T. Nickel adds toughness and deep hardenability over 4140.
CNC Turning Notes for 4340 Alloy Steel
4340 Alloy Steel turns with good chip control at standard cutting data.
For estimating, a 100 × 100 × 10 mm block of 4340 Alloy Steel weighs about 0.79 kg.
Starting Parameters for CNC Turning 4340 Alloy Steel
| Cutting speed (carbide) | 140-230 m/min |
|---|---|
| Feed | 0.1-0.3 mm/rev |
| Spindle speed, Ø25 mm bar | 1780-2930 rpm |
| Insert / tool class | ISO P — CVD-coated carbide |
| Coolant | Emulsion (6-8%) |
Starting values for 4340 Alloy Steel, Annealed or Q&T; optimised on the first article.
4340 Alloy Steel Data Relevant to CNC Turning
| Equivalent designations | UNS G43400 / 34CrNiMo6 / SNCM439 |
|---|---|
| Key composition | C 0.38-0.43%, Ni 1.65-2%, Cr 0.7-0.9%, Mo |
| Typical supply condition | Annealed or Q&T |
| Hardness (typical) | ~30-50 HRC Q&T |
| Machinability rating | 57% (AISI B1112 = 100%) |
Typical values; we work to your drawing and mill certificate.
How 4340 Alloy Steel Differs
Nickel adds toughness and deep hardenability over 4140.
Typical applications: Aircraft landing gear, crankshafts, heavy shafts.
4340 Alloy Steel vs Similar Grades
| 4340 Alloy Steel | 4142 Alloy Steel | 8620 Alloy Steel | 4140 Alloy Steel | |
|---|---|---|---|---|
| Key composition | C 0.38-0.43%, Ni 1.65-2%, Cr 0.7-0.9%, Mo | C 0.40-0.45%, Cr 0.8-1.1%, Mo 0.15-0.25% | C 0.18-0.23%, Ni 0.4-0.7%, Cr 0.4-0.6%, Mo | C 0.38-0.43%, Cr 0.8-1.1%, Mo 0.15-0.25% |
| Hardness | ~30-50 HRC Q&T | ~28-32 HRC | ~150-180 HB core; ~58-62 HRC case | ~197 HB annealed; 28-32 HRC pre-hard |
| Tensile (MPa) | ~745 annealed; up to ~1800 | ~965 | ~530-650 | ~655-1000 |
| Machinability % | 57 | 62 | 66 | 66 |
| Typical use | Aircraft landing gear, crankshafts, heavy shafts | Die holders, shafts, tooling | Gears, pinions, camshafts | Shafts, gears, tooling, spindles |
More on CNC Turning Alloy Steel
Finishing options, quality documentation and general cnc turning guidance for all alloy steel grades are on our CNC Turning Alloy Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Turning 4340 Alloy Steel
Send a STEP/IGES model or PDF drawing, confirm 4340 Alloy Steel and its condition (we usually see it supplied annealed or Q&T), the quantity, critical tolerances and any finish or certificate requirements.
4340 Alloy Steel in Other Processes
Related
Send the drawing, the 4340 Alloy Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Turning 4340 Alloy Steel?
Achievable tolerances for 4340 Alloy Steel turning depend on the alloy, geometry and feature size. Turning holds diameter tolerances to around ±0.005 mm with concentricity within 0.01 mm. Exact figures are confirmed against your drawing callouts.
Why is 4340 Alloy Steel a good choice for CNC Turning?
4340 Alloy Steel is high-strength and hardenable, which makes it well suited to CNC Turning. We tune the process to the alloy so the finished 4340 Alloy Steel turning part meets your dimensional and functional requirements.
Does CNC Turning 4340 Alloy Steel require dedicated tooling?
Most 4340 Alloy Steel turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What material thickness or size range suits CNC Turning 4340 Alloy Steel?
Turned 4340 Alloy Steel parts are produced from bar or chuck stock across a wide diameter range.
