VT machining offers CNC Turning for 20CrMnTi Steel (GB/T 3077 / ~SCM420 type), typically supplied normalised, then carburised. Chinese carburising gear steel; Ti refines grain.
CNC Turning Notes for 20CrMnTi Steel
20CrMnTi Steel turns with good chip control at standard cutting data.
For estimating, a 100 × 100 × 10 mm block of 20CrMnTi Steel weighs about 0.79 kg.
Starting Parameters for CNC Turning 20CrMnTi Steel
| Cutting speed (carbide) | 170-300 m/min |
|---|---|
| Feed | 0.1-0.35 mm/rev |
| Spindle speed, Ø25 mm bar | 2160-3820 rpm |
| Insert / tool class | ISO P — CVD-coated carbide |
| Coolant | Emulsion (5-8%); dry is possible for interrupted cuts |
Starting values for 20CrMnTi Steel, Normalised, then carburised; optimised on the first article.
20CrMnTi Steel Data Relevant to CNC Turning
| Equivalent designations | GB/T 3077 / ~SCM420 type |
|---|---|
| Key composition | C 0.17-0.23%, Cr 1-1.3%, Mn 0.8-1.1%, Ti |
| Typical supply condition | Normalised, then carburised |
| Hardness (typical) | ~58-62 HRC case |
| Machinability rating | 60% (AISI B1112 = 100%) |
Typical values; we work to your drawing and mill certificate.
How 20CrMnTi Steel Differs
Chinese carburising gear steel; Ti refines grain.
Typical applications: Automotive gears, shafts.
20CrMnTi Steel vs Similar Grades
| 20CrMnTi Steel | 42CrMo Steel | EN19 Steel | 40Cr Steel | |
|---|---|---|---|---|
| Key composition | C 0.17-0.23%, Cr 1-1.3%, Mn 0.8-1.1%, Ti | C 0.38-0.45%, Cr 0.9-1.2%, Mo 0.15-0.25% | C 0.36-0.44%, Cr 0.9-1.2%, Mo 0.25-0.35% | C 0.37-0.44%, Cr 0.8-1.1% |
| Hardness | ~58-62 HRC case | ~28-32 HRC | ~28-32 HRC | ~28-32 HRC |
| Tensile (MPa) | ~1080 core | ~1080 Q&T | ~850-1000 | ~980 Q&T |
| Machinability % | 60 | 62 | 62 | 60 |
| Typical use | Automotive gears, shafts | Gears, shafts, high-strength bolts | Shafts, gears, studs | Shafts, gears, bolts |
More on CNC Turning Steel
Finishing options, quality documentation and general cnc turning guidance for all steel grades are on our CNC Turning Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Turning 20CrMnTi Steel
Send a STEP/IGES model or PDF drawing, confirm 20CrMnTi Steel and its condition (we usually see it supplied normalised, then carburised), the quantity, critical tolerances and any finish or certificate requirements.
20CrMnTi Steel in Other Processes
Related
Send the drawing, the 20CrMnTi Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Turning 20CrMnTi Steel?
Turned 20CrMnTi Steel parts are produced from bar or chuck stock across a wide diameter range.
Can VT machining make custom 20CrMnTi Steel parts to my drawing?
Yes. 20CrMnTi Steel turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Turning 20CrMnTi Steel?
Achievable tolerances for 20CrMnTi Steel turning depend on the alloy, geometry and feature size. Turning holds diameter tolerances to around ±0.005 mm with concentricity within 0.01 mm. Exact figures are confirmed against your drawing callouts.
Why is 20CrMnTi Steel a good choice for CNC Turning?
20CrMnTi Steel is strong, economical and widely available, which makes it well suited to CNC Turning. We tune the process to the alloy so the finished 20CrMnTi Steel turning part meets your dimensional and functional requirements.
Does CNC Turning 20CrMnTi Steel require dedicated tooling?
Most 20CrMnTi Steel turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
