VT machining specialises in CNC Tapping 420 Stainless Steel. Because 420 Stainless Steel is corrosion resistant, strong and hygienic, and its machinability is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing, we plan each job around the grade to protect accuracy and surface quality.
CNC Tapping Capability for 420 Stainless Steel
- Austenitic/martensitic grades
- Corrosion resistant
- Tolerance to ±0.01 mm
- Typical hardness 70–200 HB (annealed)
420 Stainless Steel Material Data
| Density | 8.00 g/cm³ |
|---|---|
| Tensile strength | 515 MPa |
| Yield strength (0.2%) | 205 MPa |
| Hardness | 170 HB |
| Melting point | 1400–1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Thermal expansion | 17.3 ×10⁻⁶/K |
| Electrical conductivity | 2.4% |
| Machinability (C36000 = 100%) | 45% |
| Grades we run | 303, 304/304L, 316/316L, 321, 410, 416, 420, 17-4PH, 2205 duplex |
Published typical values for 304. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It work-hardens the moment a tool dwells. Constant feed and positive-rake tooling; a rubbing pass leaves a glazed skin the next tool cannot get through.
Machining 420 Stainless Steel with CNC Tapping
420 Stainless Steel behaves predictably under CNC Tapping once parameters are dialled in: machinability is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of 420 Stainless Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Tapping 420 Stainless Steel
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Tapping Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every 420 Stainless Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Why 420 Stainless Steel?
420 Stainless Steel is chosen when a part needs what this grade offers — it is corrosion resistant, strong and hygienic. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Tapping Tolerances & Surface Finish
For CNC Tapping, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Secondary Operations & Finishing
Finished 420 Stainless Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Design Tips for CNC Tapping 420 Stainless Steel
We are happy to suggest design tweaks that improve manufacturability. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in 420 Stainless Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Tapping 420 Stainless Steel
Customers order CNC Tapping 420 Stainless Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Tapping 420 Stainless Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for 420 Stainless Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Citric passivation | — | ASTM A967 / AMS 2700, removes free iron |
| Electropolish | 5–25 µm removed | Ra improves by roughly half, hygienic surface |
| Brushed / grained | Ra 0.4–1.6 µm | No. 4 finish, directional |
| PVD coating | 2–5 µm | TiN, TiCN for wear surfaces |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Tapping 420 Stainless Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 420 Stainless Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
420 Stainless Steel in Other Processes
Related
Send the drawing, the 420 Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Tapping 420 Stainless Steel?
Achievable tolerances for 420 Stainless Steel machining depend on the alloy, geometry and feature size. Milling holds positional and dimensional tolerances to around ±0.01 mm, tighter with precision setups. Exact figures are confirmed against your drawing callouts.
What surface finish is achievable on 420 Stainless Steel with CNC Tapping?
Surface finish on 420 Stainless Steel is controlled to your specification; we confirm the achievable Ra against your callout.
Can VT machining make custom 420 Stainless Steel parts to my drawing?
Yes. 420 Stainless Steel 420 Stainless Steel machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Why is 420 Stainless Steel a good choice for CNC Tapping?
420 Stainless Steel is corrosion resistant, strong and hygienic, which makes it well suited to CNC Tapping. We tune the process to the alloy so the finished 420 Stainless Steel machining part meets your dimensional and functional requirements.
What material thickness or size range suits CNC Tapping 420 Stainless Steel?
We machine 420 Stainless Steel across a broad size range; share your part envelope for confirmation.