CNC Tapping 20CrMnTi Steel

VT machining offers CNC Tapping for 20CrMnTi Steel (GB/T 3077 / ~SCM420 type), typically supplied normalised, then carburised. Chinese carburising gear steel; Ti refines grain.

CNC Tapping Notes for 20CrMnTi Steel

20CrMnTi Steel is tapped with cut taps (spiral-point for through holes) and controlled rigid-tapping speed; thread milling is used where tap breakage would be costly.

For estimating, a 100 × 100 × 10 mm block of 20CrMnTi Steel weighs about 0.79 kg.

Starting Parameters for CNC Tapping 20CrMnTi Steel

Cutting speed (carbide)10-20 m/min
Recommended tapCut tap: spiral-point (through) / spiral-flute (blind)
Tap drill for M8×1.25Ø6.8 mm (cut tap)
Spindle speed, M8400-800 rpm
Insert / tool classISO P — CVD-coated carbide
CoolantEmulsion (5-8%); dry is possible for interrupted cuts

Starting values for 20CrMnTi Steel, Normalised, then carburised; optimised on the first article.

Full material data for 20CrMnTi Steel (GB/T 3077 / ~SCM420 type) is on the CNC Milling 20CrMnTi Steel page.

More on CNC Tapping Steel

Finishing options, quality documentation and general cnc tapping guidance for all steel grades are on our CNC Tapping Steel page.

Quoting CNC Tapping 20CrMnTi Steel

Send a STEP/IGES model or PDF drawing, confirm 20CrMnTi Steel and its condition (we usually see it supplied normalised, then carburised), the quantity, critical tolerances and any finish or certificate requirements.

20CrMnTi Steel in Other Processes

Related

Send the drawing, the 20CrMnTi Steel condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

What is the typical lead time and minimum order for CNC Tapping 20CrMnTi Steel?

CNC Tapping prototypes for 20CrMnTi Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.

Does CNC Tapping 20CrMnTi Steel require dedicated tooling?

Most 20CrMnTi Steel machining work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.

What surface finish is achievable on 20CrMnTi Steel with CNC Tapping?

Surface finish on 20CrMnTi Steel is controlled to your specification; we confirm the achievable Ra against your callout.

Why is 20CrMnTi Steel a good choice for CNC Tapping?

20CrMnTi Steel is strong, economical and widely available, which makes it well suited to CNC Tapping. We tune the process to the alloy so the finished 20CrMnTi Steel machining part meets your dimensional and functional requirements.

What tolerances can you hold for CNC Tapping 20CrMnTi Steel?

Achievable tolerances for 20CrMnTi Steel machining depend on the alloy, geometry and feature size. Milling holds positional and dimensional tolerances to around ±0.01 mm, tighter with precision setups. Exact figures are confirmed against your drawing callouts.

How clean are the edges produced by CNC Tapping on 20CrMnTi Steel?

Machined 20CrMnTi Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.