VT machining offers CNC Swiss Machining for Grade 1 Titanium (UNS R50250 / ASTM B348 Gr1), typically supplied annealed. Softest, most formable CP titanium.
CNC Swiss Machining Notes for Grade 1 Titanium
Grade 1 Titanium can be Swiss-turned, but slower cutting data and guide-bushing clearances are set for this grade to protect slender features.
For estimating, a 100 × 100 × 10 mm block of Grade 1 Titanium weighs about 0.45 kg.
Starting Parameters for CNC Swiss Machining Grade 1 Titanium
| Cutting speed (carbide) | 40-90 m/min |
|---|---|
| Feed | 0.08-0.2 mm/rev |
| Spindle speed, Ø8 mm bar | 1590-3580 rpm |
| Insert / tool class | ISO S — sharp PVD-coated carbide |
| Coolant | High-pressure flood emulsion (70 bar+ through-tool where possible) |
| Length-to-diameter capability | up to ~10:1 (slower feeds for this grade) |
Starting values for Grade 1 Titanium, Annealed; optimised on the first article.
Full material data for Grade 1 Titanium (UNS R50250 / ASTM B348 Gr1) is on the CNC Turning Grade 1 Titanium page.
More on CNC Swiss Machining Titanium
Finishing options, quality documentation and general cnc swiss machining guidance for all titanium grades are on our CNC Swiss Machining Titanium page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Swiss Machining Grade 1 Titanium
Send a STEP/IGES model or PDF drawing, confirm Grade 1 Titanium and its condition (we usually see it supplied annealed), the quantity, critical tolerances and any finish or certificate requirements.
Grade 1 Titanium in Other Processes
Related
Send the drawing, the Grade 1 Titanium condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Swiss Machining Grade 1 Titanium?
Turned Grade 1 Titanium parts are produced from bar or chuck stock across a wide diameter range.
Why is Grade 1 Titanium a good choice for CNC Swiss Machining?
Grade 1 Titanium is high strength-to-weight, biocompatible and corrosion resistant, which makes it well suited to CNC Swiss Machining. We tune the process to the alloy so the finished Grade 1 Titanium turning part meets your dimensional and functional requirements.
Can VT machining make custom Grade 1 Titanium parts to my drawing?
Yes. Grade 1 Titanium turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Swiss Machining Grade 1 Titanium?
Achievable tolerances for Grade 1 Titanium turning depend on the alloy, geometry and feature size. Turning holds diameter tolerances to around ±0.005 mm with concentricity within 0.01 mm. Exact figures are confirmed against your drawing callouts.