CNC Bending Grade 1 Titanium from VT machining delivers precision Grade 1 Titanium parts made to your exact drawing. CNC bending forms sheet metal to precise angles using a programmed press brake and back-gauge, with parameters tuned to Grade 1 Titanium, which is high strength-to-weight, biocompatible and corrosion resistant.
CNC Bending Capability for Grade 1 Titanium
- High strength-to-weight
- Biocompatible
- Corrosion resistant
- Tolerance to ±0.01 mm
Grade 1 Titanium Material Data
| Density | 4.43 g/cm³ |
|---|---|
| Tensile strength | 950 MPa |
| Yield strength (0.2%) | 880 MPa |
| Hardness | 334 HB / 36 HRC |
| Melting point | 1604–1660 °C |
| Thermal conductivity | 6.7 W/m·K |
| Thermal expansion | 8.6 ×10⁻⁶/K |
| Electrical conductivity | 3.1% |
| Machinability (C36000 = 100%) | 22% |
| Grades we run | Gr 1, Gr 2 (CP), Gr 5 Ti-6Al-4V, Gr 23 ELI, Gr 7, Gr 9 |
Published typical values for Ti-6Al-4V (Gr 5). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Heat has nowhere to go — thermal conductivity is 1/25th of aluminium, so it all goes into the tool. Low surface speed, heavy feed, flood coolant, and the cutter never stops moving.
Machining Grade 1 Titanium with CNC Bending
Grade 1 Titanium behaves predictably under CNC Bending once parameters are dialled in: machinability is difficult; low speeds, high feeds, flood coolant to manage heat, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of Grade 1 Titanium run consistently from one batch to the next.
Achievable Tolerances for CNC Bending Grade 1 Titanium
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Bending Tolerances & Surface Finish
Formed Grade 1 Titanium holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Why Grade 1 Titanium?
Grade 1 Titanium is chosen when a part needs what this grade offers — it is high strength-to-weight, biocompatible and corrosion resistant. We confirm the grade and any temper or heat-treat condition with you before machining.
Design Tips for CNC Bending Grade 1 Titanium
We are happy to suggest design tweaks that improve manufacturability. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed Grade 1 Titanium. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Bending Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every Grade 1 Titanium part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Secondary Operations & Finishing
Finished Grade 1 Titanium parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Applications of CNC Bending Grade 1 Titanium
Customers order CNC Bending Grade 1 Titanium components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Bending Grade 1 Titanium
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for Grade 1 Titanium
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Type II anodise | — | Colour coding, biocompatible |
| Type III anodise | — | Anti-galling for threaded and sliding parts |
| Passivation | — | ASTM F86 for implant-grade parts |
| Electropolish | 5–20 µm removed | Removes the machining layer for medical use |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Bending Grade 1 Titanium
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Grade 1 Titanium grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Grade 1 Titanium in Other Processes
Related
Send the drawing, the Grade 1 Titanium condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Does CNC Bending Grade 1 Titanium require dedicated tooling?
Most Grade 1 Titanium forming work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What is CNC Bending Grade 1 Titanium and how is it done?
CNC Bending Grade 1 Titanium refers to cNC bending forms sheet metal to precise angles using a programmed press brake and back-gauge. Applied to Grade 1 Titanium — high strength-to-weight, biocompatible and corrosion resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What material thickness or size range suits CNC Bending Grade 1 Titanium?
We form Grade 1 Titanium sheet and plate to your developed flat pattern and bend sequence.
What surface finish is achievable on Grade 1 Titanium with CNC Bending?
Surface finish on Grade 1 Titanium is controlled to your specification; we confirm the achievable Ra against your callout.
What tolerances can you hold for CNC Bending Grade 1 Titanium?
Achievable tolerances for Grade 1 Titanium forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.