CNC Surface Grinding C17510 Beryllium Copper is part of VT machining's grade-specific capability. C17510 Beryllium Copper is high-strength, conductive and non-sparking, and we combine controlled grinding with material-aware setup to produce parts that meet your specification.
CNC Surface Grinding Capability for C17510 Beryllium Copper
- Heat-treatable to high strength
- Good conductivity
- Non-sparking
- Excellent fatigue life
C17510 Beryllium Copper Material Data
| Density | 8.25 g/cm³ |
|---|---|
| Tensile strength | 1140–1380 MPa |
| Yield strength (0.2%) | 1000–1200 MPa |
| Hardness | 36–42 HRC |
| Melting point | 866–980 °C |
| Thermal conductivity | 105–130 W/m·K |
| Thermal expansion | 17.8 ×10⁻⁶/K |
| Electrical conductivity | 22% |
| Machinability (C36000 = 100%) | 20–35% |
| Grades we run | C17200, C17300, C17510 (high conductivity), C17410 |
Published typical values for C17200 (TH04/AT). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Machined in the solution-annealed state and age-hardened afterwards, which shrinks the part by roughly 0.1–0.2%. That shrink is compensated in the program.
Machining C17510 Beryllium Copper with CNC Surface Grinding
The machinability of C17510 Beryllium Copper is good; heat-treatable to high strength with good conductivity. For CNC Surface Grinding we select tooling, feeds, speeds and coolant to match, keeping the C17510 Beryllium Copper workpiece stable and the result accurate.
Because we machine C17510 Beryllium Copper regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Surface Grinding C17510 Beryllium Copper
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Surface Grinding Tolerances & Surface Finish
Ground C17510 Beryllium Copper reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Why C17510 Beryllium Copper?
Specifying C17510 Beryllium Copper for CNC Surface Grinding C17510 Beryllium Copper is usually about its properties: high-strength, conductive and non-sparking. Tell us the condition you need and we machine to it.
Secondary Operations & Finishing
We complete C17510 Beryllium Copper components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Design Tips for CNC Surface Grinding C17510 Beryllium Copper
A few design choices make a real difference to cost and quality. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on C17510 Beryllium Copper efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Surface Grinding Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on C17510 Beryllium Copper parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Applications of CNC Surface Grinding C17510 Beryllium Copper
CNC Surface Grinding of C17510 Beryllium Copper supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Surface Grinding C17510 Beryllium Copper
Ordering C17510 Beryllium Copper parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for C17510 Beryllium Copper
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Surface Grinding C17510 Beryllium Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C17510 Beryllium Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C17510 Beryllium Copper in Other Processes
Related
Send the drawing, the C17510 Beryllium Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Surface Grinding C17510 Beryllium Copper?
CNC Surface Grinding prototypes for C17510 Beryllium Copper can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What surface finish is achievable on C17510 Beryllium Copper with CNC Surface Grinding?
Grinding can take C17510 Beryllium Copper to a fine finish — typically Ra 0.1–0.4 µm, and to a mirror grade on suitable alloys.
Which industries use CNC Surface Grinding C17510 Beryllium Copper parts?
CNC Surface Grinding C17510 Beryllium Copper parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C17510 Beryllium Copper components are required.
How clean are the edges produced by CNC Surface Grinding on C17510 Beryllium Copper?
Machined C17510 Beryllium Copper edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Why is C17510 Beryllium Copper a good choice for CNC Surface Grinding?
C17510 Beryllium Copper is high-strength, conductive and non-sparking, which makes it well suited to CNC Surface Grinding. We tune the process to the alloy so the finished C17510 Beryllium Copper grinding part meets your dimensional and functional requirements.
What material thickness or size range suits CNC Surface Grinding C17510 Beryllium Copper?
We machine C17510 Beryllium Copper across a broad size range; share your part envelope for confirmation.