VT machining offers CNC Boring for C17510 Beryllium Copper (UNS C17510 / CuNi2Be / Class 3), typically supplied aged (TF00/HT). Lower strength than C17200 but higher conductivity (~45-60% IACS).
CNC Boring Notes for C17510 Beryllium Copper
Boring bars for C17510 Beryllium Copper are chosen for rigidity, allowing a single finishing pass for size and roundness.
For estimating, a 100 × 100 × 10 mm block of C17510 Beryllium Copper weighs about 0.88 kg.
Starting Parameters for CNC Boring C17510 Beryllium Copper
| Cutting speed (carbide) | 70-135 m/min |
|---|---|
| Feed | 0.056-0.154 mm/rev |
| Spindle speed, Ø30 mm bore | 740-1430 rpm |
| Insert / tool class | ISO N — sharp, polished, uncoated or DLC |
| Coolant | Flood coolant (required to control beryllium-bearing dust) |
Starting values for C17510 Beryllium Copper, Aged (TF00/HT); optimised on the first article.
Full material data for C17510 Beryllium Copper (UNS C17510 / CuNi2Be / Class 3) is on the CNC Turning C17510 Beryllium Copper page.
More on CNC Boring Beryllium Copper
Finishing options, quality documentation and general cnc boring guidance for all beryllium copper grades are on our CNC Boring Beryllium Copper page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Boring C17510 Beryllium Copper
Send a STEP/IGES model or PDF drawing, confirm C17510 Beryllium Copper and its condition (we usually see it supplied aged (TF00/HT)), the quantity, critical tolerances and any finish or certificate requirements.
C17510 Beryllium Copper in Other Processes
Related
Send the drawing, the C17510 Beryllium Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is C17510 Beryllium Copper a good choice for CNC Boring?
C17510 Beryllium Copper is high-strength, conductive and non-sparking, which makes it well suited to CNC Boring. We tune the process to the alloy so the finished C17510 Beryllium Copper turning part meets your dimensional and functional requirements.
What surface finish is achievable on C17510 Beryllium Copper with CNC Boring?
Surface finish on C17510 Beryllium Copper is controlled to your specification; we confirm the achievable Ra against your callout.
What is the typical lead time and minimum order for CNC Boring C17510 Beryllium Copper?
CNC Boring prototypes for C17510 Beryllium Copper can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Does CNC Boring C17510 Beryllium Copper require dedicated tooling?
Most C17510 Beryllium Copper turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What material thickness or size range suits CNC Boring C17510 Beryllium Copper?
Turned C17510 Beryllium Copper parts are produced from bar or chuck stock across a wide diameter range.
