VT machining provides CNC Routing Beryllium Copper for customers who need accurate, repeatable Beryllium Copper components. Because Beryllium Copper is high strength with good conductivity and fatigue life, we adapt the process to suit — controlling the variables that matter for this alloy.
CNC Routing Capability for Beryllium Copper
- High-feed profiling
- Sheet and plate stock
- Nested-part layouts
- Edge tolerance ±0.1 mm
Beryllium Copper Material Data
| Density | 8.25 g/cm³ |
|---|---|
| Tensile strength | 1140–1380 MPa |
| Yield strength (0.2%) | 1000–1200 MPa |
| Hardness | 36–42 HRC |
| Melting point | 866–980 °C |
| Thermal conductivity | 105–130 W/m·K |
| Thermal expansion | 17.8 ×10⁻⁶/K |
| Electrical conductivity | 22% |
| Machinability (C36000 = 100%) | 20–35% |
| Grades we run | C17200, C17300, C17510 (high conductivity), C17410 |
Published typical values for C17200 (TH04/AT). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Machined in the solution-annealed state and age-hardened afterwards, which shrinks the part by roughly 0.1–0.2%. That shrink is compensated in the program.
How CNC Routing Beryllium Copper Works
Rotating multi-flute cutters remove material as the Beryllium Copper workpiece is driven through programmed tool paths on 3-, 4- or 5-axis machining centres. Climb milling, step-over and depth-of-cut are set so chip load stays in the ideal band for the alloy.
We start from your supplied geometry and tolerance scheme. The setup is designed to minimise re-clamping, which protects positional accuracy across features. A first article is verified against the drawing before the balance of the batch is released.
Achievable Tolerances for CNC Routing Beryllium Copper
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Routing Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Design Tips for CNC Routing Beryllium Copper
Small design adjustments often cut cost and lead time. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in Beryllium Copper. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Most Beryllium Copper parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
Working with Beryllium Copper
Beryllium Copper is high strength with good conductivity and fatigue life. We translate those properties into a process plan: the right tooling, speeds, feeds and fixturing for the alloy.
Where the grade, temper or heat-treat condition matters to performance, we confirm it with you and can supply material certificates. Material is procured to recognised standards for consistent, repeatable results.
CNC Routing Tolerances & Surface Finish
For CNC Routing, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC Routing Beryllium Copper
Beryllium Copper parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Routing Beryllium Copper
Starting your project takes one email. Send your CAD or 2D drawing, the Beryllium Copper grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Parts We Have Run in Beryllium Copper
Three representative CNC Routing Beryllium Copper jobs, with the callouts that actually drove the process plan. Yours will differ — these are here so you can judge whether your part is in our range before you spend time on an RFQ.
Optical mount plate
- Material
- Beryllium Copper
- Size
- 160 × 160 × 12 mm
- Key callouts
- Hole pattern true position ±0.02 mm, flatness 0.01 mm
- Batch
- 40 pcs
Roughed, stress-relieved overnight, then finished — the plate is too thin to hold flatness in one hit.
Vacuum chamber flange
- Material
- Beryllium Copper
- Size
- Ø180 × 20 mm
- Key callouts
- Knife-edge seal Ra 0.4 µm, bolt circle ±0.05 mm
- Batch
- 60 pcs
Sealing face finished last, then handled in gloves and bagged straight off the machine.
Robot end-effector bracket
- Material
- Beryllium Copper
- Size
- 180 × 90 × 30 mm
- Key callouts
- Bore pair concentric within 0.02 mm, weight reduction pockets
- Batch
- 120 pcs
Pockets ganged so wall thickness never drops below 2 mm at the load path.
Finishing Options for Beryllium Copper
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Routing Beryllium Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Beryllium Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Routing
Other Processes for Beryllium Copper
Send the drawing, the Beryllium Copper grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom Beryllium Copper parts to my drawing?
Yes. Beryllium Copper Beryllium Copper machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
How clean are the edges produced by CNC Routing on Beryllium Copper?
Machined Beryllium Copper edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Why is Beryllium Copper a good choice for CNC Routing?
Beryllium Copper is high strength with good conductivity and fatigue life, which makes it well suited to CNC Routing. We tune the process to the alloy so the finished Beryllium Copper machining part meets your dimensional and functional requirements.
What is CNC Routing Beryllium Copper and how is it done?
CNC Routing Beryllium Copper refers to cNC routing cuts profiles and openings in sheet and plate at high feed rates with a rotating router bit. Applied to Beryllium Copper — high strength with good conductivity and fatigue life — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.