Need reliable CNC Punching 2205 Duplex Stainless Steel? VT machining machines 2205 Duplex Stainless Steel to tight tolerances and consistent quality. As a material, 2205 Duplex Stainless Steel is high-strength, chloride-corrosion-resistant; we adapt feeds, speeds and tooling to suit.
CNC Punching Capability for 2205 Duplex Stainless Steel
- Duplex ferritic-austenitic structure
- High strength + chloride resistance
- Tolerance to ±0.01 mm
- PREN typically 35–43
2205 Duplex Stainless Steel Material Data
| Density | 8.00 g/cm³ |
|---|---|
| Tensile strength | 515 MPa |
| Yield strength (0.2%) | 205 MPa |
| Hardness | 170 HB |
| Melting point | 1400–1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Thermal expansion | 17.3 ×10⁻⁶/K |
| Electrical conductivity | 2.4% |
| Machinability (C36000 = 100%) | 45% |
| Grades we run | 303, 304/304L, 316/316L, 321, 410, 416, 420, 17-4PH, 2205 duplex |
Published typical values for 304. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It work-hardens the moment a tool dwells. Constant feed and positive-rake tooling; a rubbing pass leaves a glazed skin the next tool cannot get through.
Machining 2205 Duplex Stainless Steel with CNC Punching
2205 Duplex Stainless Steel behaves predictably under CNC Punching once parameters are dialled in: machinability is tougher than austenitic grades; reduced speeds and rigid setups maintain accuracy, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of 2205 Duplex Stainless Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Punching 2205 Duplex Stainless Steel
| Feature | Standard | Precision |
|---|---|---|
| Hole position across sheet | ±0.15 mm | ±0.10 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Overall blank size | ±0.20 mm | ±0.10 mm |
| Minimum hole | 1.0 × thickness | 0.8 × thickness |
| Hole-to-edge distance | 2.0 × thickness | 1.5 × thickness |
| Burr height | 0.08 mm | 0.03 mm (deburred) |
| Sheet thickness range | 0.5–6.0 mm | 0.5–3.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Punching Tolerances & Surface Finish
Punched 2205 Duplex Stainless Steel holds hole-position repeatability around ±0.10 mm across the sheet, with consistent hole quality when punch/die clearance is matched to the gauge.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Design Tips for CNC Punching 2205 Duplex Stainless Steel
We are happy to suggest design tweaks that improve manufacturability. Keeping hole-to-edge and hole-to-hole distances at least 1.5–2× thickness avoids distortion and tearing in punched 2205 Duplex Stainless Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Why 2205 Duplex Stainless Steel?
2205 Duplex Stainless Steel is chosen when a part needs what this grade offers — it is high-strength, chloride-corrosion-resistant. We confirm the grade and any temper or heat-treat condition with you before machining.
Secondary Operations & Finishing
Finished 2205 Duplex Stainless Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Punching Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every 2205 Duplex Stainless Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Applications of CNC Punching 2205 Duplex Stainless Steel
Customers order CNC Punching 2205 Duplex Stainless Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Punching 2205 Duplex Stainless Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for 2205 Duplex Stainless Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Citric passivation | — | ASTM A967 / AMS 2700, removes free iron |
| Electropolish | 5–25 µm removed | Ra improves by roughly half, hygienic surface |
| Brushed / grained | Ra 0.4–1.6 µm | No. 4 finish, directional |
| PVD coating | 2–5 µm | TiN, TiCN for wear surfaces |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Punching 2205 Duplex Stainless Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 2205 Duplex Stainless Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
2205 Duplex Stainless Steel in Other Processes
Related
Send the drawing, the 2205 Duplex Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is 2205 Duplex Stainless Steel a good choice for CNC Punching?
2205 Duplex Stainless Steel is high-strength, chloride-corrosion-resistant, which makes it well suited to CNC Punching. We tune the process to the alloy so the finished 2205 Duplex Stainless Steel punching part meets your dimensional and functional requirements.
What material thickness or size range suits CNC Punching 2205 Duplex Stainless Steel?
Punching suits 2205 Duplex Stainless Steel sheet roughly 0.5–6 mm thick, with clearance matched to the gauge.
Can VT machining make custom 2205 Duplex Stainless Steel parts to my drawing?
Yes. 2205 Duplex Stainless Steel 2205 Duplex Stainless Steel punching is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Which industries use CNC Punching 2205 Duplex Stainless Steel parts?
CNC Punching 2205 Duplex Stainless Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise 2205 Duplex Stainless Steel components are required.
Does CNC Punching 2205 Duplex Stainless Steel require dedicated tooling?
Punching uses programmable turret tooling; standard tools cover most patterns, with special tools added for unique forms.