VT machining offers CNC Plasma Cutting for 2205 Duplex Stainless Steel (UNS S32205 / 1.4462), typically supplied solution annealed. Roughly double the yield strength of 316 with better chloride stress-corrosion resistance.
CNC Plasma Cutting Notes for 2205 Duplex Stainless Steel
Plasma is a fast, economical option for thicker 2205 Duplex Stainless Steel plate where edge finish is less critical.
For estimating, a 100 × 100 × 10 mm block of 2205 Duplex Stainless Steel weighs about 0.78 kg.
Process Data for CNC Plasma Cutting 2205 Duplex Stainless Steel
| Max practical thickness | ~40 mm (high-definition plasma) |
|---|---|
| Edge tolerance | ±0.3-0.5 mm, 1-3° bevel |
| Heat-affected zone | ~0.5-1.5 mm (allow machining stock if critical) |
| Plasma gas | Nitrogen or argon-hydrogen |
Typical values for 2205 Duplex Stainless Steel, Solution annealed; confirmed on the first part.
Full material data for 2205 Duplex Stainless Steel (UNS S32205 / 1.4462) is on the CNC Laser Cutting 2205 Duplex Stainless Steel page.
More on CNC Plasma Cutting Stainless Steel
Finishing options, quality documentation and general cnc plasma cutting guidance for all stainless steel grades are on our CNC Plasma Cutting Stainless Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Plasma Cutting 2205 Duplex Stainless Steel
Send a STEP/IGES model or PDF drawing, confirm 2205 Duplex Stainless Steel and its condition (we usually see it supplied solution annealed), the quantity, critical tolerances and any finish or certificate requirements.
2205 Duplex Stainless Steel in Other Processes
Related
Send the drawing, the 2205 Duplex Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Does CNC Plasma Cutting 2205 Duplex Stainless Steel require dedicated tooling?
Most 2205 Duplex Stainless Steel cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What tolerances can you hold for CNC Plasma Cutting 2205 Duplex Stainless Steel?
Achievable tolerances for 2205 Duplex Stainless Steel cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.
What is the typical lead time and minimum order for CNC Plasma Cutting 2205 Duplex Stainless Steel?
CNC Plasma Cutting prototypes for 2205 Duplex Stainless Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What material thickness or size range suits CNC Plasma Cutting 2205 Duplex Stainless Steel?
Laser-cut 2205 Duplex Stainless Steel thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
What is CNC Plasma Cutting 2205 Duplex Stainless Steel and how is it done?
CNC Plasma Cutting 2205 Duplex Stainless Steel refers to cNC plasma cutting uses an ionized gas jet to sever thicker conductive plate at high speed. Applied to 2205 Duplex Stainless Steel — high-strength, chloride-corrosion-resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.