VT machining specialises in CNC Press Brake Forming Grade 4 Titanium. Because Grade 4 Titanium is high strength-to-weight, biocompatible and corrosion resistant, and its machinability is difficult; low speeds, high feeds, flood coolant to manage heat, we plan each job around the grade to protect accuracy and surface quality.
CNC Press Brake Forming Capability for Grade 4 Titanium
- High strength-to-weight
- Biocompatible
- Corrosion resistant
- Tolerance to ±0.01 mm
Grade 4 Titanium Material Data
| Density | 4.43 g/cm³ |
|---|---|
| Tensile strength | 950 MPa |
| Yield strength (0.2%) | 880 MPa |
| Hardness | 334 HB / 36 HRC |
| Melting point | 1604–1660 °C |
| Thermal conductivity | 6.7 W/m·K |
| Thermal expansion | 8.6 ×10⁻⁶/K |
| Electrical conductivity | 3.1% |
| Machinability (C36000 = 100%) | 22% |
| Grades we run | Gr 1, Gr 2 (CP), Gr 5 Ti-6Al-4V, Gr 23 ELI, Gr 7, Gr 9 |
Published typical values for Ti-6Al-4V (Gr 5). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Heat has nowhere to go — thermal conductivity is 1/25th of aluminium, so it all goes into the tool. Low surface speed, heavy feed, flood coolant, and the cutter never stops moving.
Machining Grade 4 Titanium with CNC Press Brake Forming
When forming Grade 4 Titanium, machinability is difficult; low speeds, high feeds, flood coolant to manage heat. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for Grade 4 Titanium mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Press Brake Forming Grade 4 Titanium
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
Most Grade 4 Titanium parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
Design Tips for CNC Press Brake Forming Grade 4 Titanium
Small design adjustments often cut cost and lead time. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed Grade 4 Titanium. If you send your model early, we will return practical DFM feedback before you commit to production.
Why Grade 4 Titanium?
Customers select Grade 4 Titanium for CNC Press Brake Forming because it is high strength-to-weight, biocompatible and corrosion resistant. We handle grade verification and any required heat treatment or finishing.
CNC Press Brake Forming Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
CNC Press Brake Forming Tolerances & Surface Finish
Formed Grade 4 Titanium holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Applications of CNC Press Brake Forming Grade 4 Titanium
Grade 4 Titanium parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Press Brake Forming Grade 4 Titanium
Starting your project takes one email. Send your CAD or 2D drawing, the Grade 4 Titanium grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for Grade 4 Titanium
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Type II anodise | — | Colour coding, biocompatible |
| Type III anodise | — | Anti-galling for threaded and sliding parts |
| Passivation | — | ASTM F86 for implant-grade parts |
| Electropolish | 5–20 µm removed | Removes the machining layer for medical use |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Press Brake Forming Grade 4 Titanium
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Grade 4 Titanium grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Grade 4 Titanium in Other Processes
Related
Send the drawing, the Grade 4 Titanium condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Which industries use CNC Press Brake Forming Grade 4 Titanium parts?
CNC Press Brake Forming Grade 4 Titanium parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Grade 4 Titanium components are required.
What surface finish is achievable on Grade 4 Titanium with CNC Press Brake Forming?
Surface finish on Grade 4 Titanium is controlled to your specification; we confirm the achievable Ra against your callout.
What is the typical lead time and minimum order for CNC Press Brake Forming Grade 4 Titanium?
CNC Press Brake Forming prototypes for Grade 4 Titanium can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What tolerances can you hold for CNC Press Brake Forming Grade 4 Titanium?
Achievable tolerances for Grade 4 Titanium forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.