CNC Drilling Grade 4 Titanium

VT machining offers CNC Drilling for Grade 4 Titanium (UNS R50700 / ASTM B348 Gr4), typically supplied annealed. Strongest CP titanium; used for dental and surgical parts.

CNC Drilling Notes for Grade 4 Titanium

Drilling Grade 4 Titanium uses through-coolant carbide drills and peck cycles, because the chip tends to weld and the hole wall work-hardens if the drill dwells.

For estimating, a 100 × 100 × 10 mm block of Grade 4 Titanium weighs about 0.45 kg.

Starting Parameters for CNC Drilling Grade 4 Titanium

Cutting speed (carbide)20-50 m/min
Feed, Ø8 mm drill0.064-0.14 mm/rev
Spindle speed, Ø8 mm800-1990 rpm
Peck depth0.5-1 × D (through-coolant preferred)
Insert / tool classISO S — sharp PVD-coated carbide
CoolantHigh-pressure flood emulsion (70 bar+ through-tool where possible)

Starting values for Grade 4 Titanium, Annealed; optimised on the first article.

Full material data for Grade 4 Titanium (UNS R50700 / ASTM B348 Gr4) is on the CNC Milling Grade 4 Titanium page.

More on CNC Drilling Titanium

Finishing options, quality documentation and general cnc drilling guidance for all titanium grades are on our CNC Drilling Titanium page.

Quoting CNC Drilling Grade 4 Titanium

Send a STEP/IGES model or PDF drawing, confirm Grade 4 Titanium and its condition (we usually see it supplied annealed), the quantity, critical tolerances and any finish or certificate requirements.

Grade 4 Titanium in Other Processes

Related

Send the drawing, the Grade 4 Titanium condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

How clean are the edges produced by CNC Drilling on Grade 4 Titanium?

Machined Grade 4 Titanium edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.

Why is Grade 4 Titanium a good choice for CNC Drilling?

Grade 4 Titanium is high strength-to-weight, biocompatible and corrosion resistant, which makes it well suited to CNC Drilling. We tune the process to the alloy so the finished Grade 4 Titanium machining part meets your dimensional and functional requirements.

What is CNC Drilling Grade 4 Titanium and how is it done?

CNC Drilling Grade 4 Titanium refers to programmed drilling produces accurately positioned holes, including deep and pattern hole arrays. Applied to Grade 4 Titanium — high strength-to-weight, biocompatible and corrosion resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.

Can VT machining make custom Grade 4 Titanium parts to my drawing?

Yes. Grade 4 Titanium machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.

What is the typical lead time and minimum order for CNC Drilling Grade 4 Titanium?

CNC Drilling prototypes for Grade 4 Titanium can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.

What surface finish is achievable on Grade 4 Titanium with CNC Drilling?

Surface finish on Grade 4 Titanium is controlled to your specification; we confirm the achievable Ra against your callout.