CNC Press Brake Forming Copper is a core capability at VT machining. We combine controlled forming with material-aware setup for Copper — an alloy that is excellent electrical and thermal conductivity — to produce parts that meet your specification first time.
CNC Press Brake Forming Capability for Copper
- Tonnage matched to material
- Air, bottom & coining
- Repeatable bend angles
- Long-part capability
Copper Material Data
| Density | 8.94 g/cm³ |
|---|---|
| Tensile strength | 220–350 MPa |
| Yield strength (0.2%) | 70–330 MPa |
| Hardness | 40–100 HV |
| Melting point | 1083 °C |
| Thermal conductivity | 391 W/m·K |
| Thermal expansion | 17.0 ×10⁻⁶/K |
| Electrical conductivity | 101% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C10100 OFE, C10200 OF, C11000 ETP, C14500 tellurium copper |
Published typical values for C11000 ETP. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It smears rather than cuts. Razor-sharp uncoated tooling and high rake; if the print allows it, C14500 tellurium copper machines four times better at ~90% IACS.
How CNC Press Brake Forming Copper Works
The Copper blank is bent or formed against tooling under CNC-controlled ram travel and back-gauge positioning. Bend allowance and springback are compensated in the program so finished angles hit the print.
Every job begins from your CAD model or 2D drawing. Fixturing and tool paths are planned so the most critical dimensions are produced in the most rigid, repeatable setup. Critical dimensions are checked on the first part and monitored through the run.
Achievable Tolerances for CNC Press Brake Forming Copper
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Working with Copper
Copper offers a useful combination of properties: it is excellent electrical and thermal conductivity. Those characteristics shape how we approach forming — from tool and parameter selection to work-holding and coolant.
If your application is sensitive to alloy condition, we agree the specification in writing and document it. Stock is sourced from reputable suppliers so what you order is what you receive.
Design Tips for CNC Press Brake Forming Copper
A few design choices make a real difference to cost and quality. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed Copper. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Press Brake Forming Tolerances & Surface Finish
Formed Copper holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
CNC Press Brake Forming Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on Copper parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Secondary Operations & Finishing
We complete Copper components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Applications of CNC Press Brake Forming Copper
CNC Press Brake Forming of Copper supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Press Brake Forming Copper
Ordering Copper parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Parts We Have Run in Copper
Three representative CNC Press Brake Forming Copper jobs, with the callouts that actually drove the process plan. Yours will differ — these are here so you can judge whether your part is in our range before you spend time on an RFQ.
Hemmed panel edge
- Material
- Copper
- Size
- 400 mm hem, 1.2 mm
- Key callouts
- Hem flat to 0.3 mm
- Batch
- 1,500 pcs
Hemmed to remove the sharp edge without a secondary deburr operation.
U-channel
- Material
- Copper
- Size
- 800 mm long, 3 mm thick
- Key callouts
- Angle ±0.5°, straightness 1 mm over length
- Batch
- 250 pcs
Formed in two hits with a rotating die to avoid marking the outside face.
Chassis with countersinks
- Material
- Copper
- Size
- 450 × 300 × 2 mm
- Key callouts
- Countersink depth ±0.1 mm, 6 bends
- Batch
- 700 pcs
Countersinks formed before bending while the sheet is still flat and supported.
Finishing Options for Copper
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Tin plate | 3–15 µm | Solderable, prevents oxidation |
| Silver plate | 2–10 µm | Lowest contact resistance for RF and power |
| Nickel underplate | 2–5 µm | Diffusion barrier under tin or gold |
| Gold flash | 0.05–1 µm | Contact surfaces, over nickel |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Press Brake Forming Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Press Brake Forming
Other Processes for Copper
Send the drawing, the Copper grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Press Brake Forming Copper?
CNC Press Brake Forming prototypes for Copper can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What is CNC Press Brake Forming Copper and how is it done?
CNC Press Brake Forming Copper refers to press brake forming creates bends and complex profiles with CNC-controlled ram depth and gauging. Applied to Copper — excellent electrical and thermal conductivity — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What surface finish is achievable on Copper with CNC Press Brake Forming?
Surface finish on Copper is controlled to your specification; we confirm the achievable Ra against your callout.
Can VT machining make custom Copper parts to my drawing?
Yes. Copper Copper forming is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Press Brake Forming Copper?
Achievable tolerances for Copper forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
How clean are the edges produced by CNC Press Brake Forming on Copper?
Machined Copper edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.