VT machining offers CNC Laser Cutting for 410 Stainless Steel (UNS S41000 / 1.4006 / SUS410), typically supplied annealed or hardened. Basic hardenable martensitic grade; magnetic and moderate corrosion resistance.
CNC Laser Cutting Notes for 410 Stainless Steel
Fibre-laser cutting of 410 Stainless Steel sheet gives a narrow kerf with minimal burr.
For estimating, a 100 × 100 × 10 mm block of 410 Stainless Steel weighs about 0.78 kg.
Process Data for CNC Laser Cutting 410 Stainless Steel
| Max practical thickness (6 kW fibre) | 20 mm |
|---|---|
| Assist gas | Nitrogen |
| Kerf width | 0.1-0.3 mm |
| Profile tolerance | ±0.1 mm (≤6 mm), ±0.2 mm thicker |
Typical values for 410 Stainless Steel, Annealed or hardened; confirmed on the first part.
410 Stainless Steel Data Relevant to CNC Laser Cutting
| Equivalent designations | UNS S41000 / 1.4006 / SUS410 |
|---|---|
| Key composition | Cr 11.5-13.5% |
| Density | 7.75 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Laser Cutting Stainless Steel
Finishing options, quality documentation and general cnc laser cutting guidance for all stainless steel grades are on our CNC Laser Cutting Stainless Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Laser Cutting 410 Stainless Steel
Send a STEP/IGES model or PDF drawing, confirm 410 Stainless Steel and its condition (we usually see it supplied annealed or hardened), the quantity, critical tolerances and any finish or certificate requirements.
410 Stainless Steel in Other Processes
Related
Send the drawing, the 410 Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is 410 Stainless Steel a good choice for CNC Laser Cutting?
410 Stainless Steel is corrosion resistant, strong and hygienic, which makes it well suited to CNC Laser Cutting. We tune the process to the alloy so the finished 410 Stainless Steel cutting part meets your dimensional and functional requirements.
What tolerances can you hold for CNC Laser Cutting 410 Stainless Steel?
Achievable tolerances for 410 Stainless Steel cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.
What is the typical lead time and minimum order for CNC Laser Cutting 410 Stainless Steel?
CNC Laser Cutting prototypes for 410 Stainless Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What surface finish is achievable on 410 Stainless Steel with CNC Laser Cutting?
Laser cutting leaves a clean cut face on 410 Stainless Steel with a small heat-affected zone; most parts need little secondary finishing.
How clean are the edges produced by CNC Laser Cutting on 410 Stainless Steel?
Laser cutting leaves 410 Stainless Steel with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.