VT machining specialises in CNC Gear Hobbing SPCC Steel. Because SPCC Steel is strong, economical and widely available, and its machinability is good to excellent depending on carbon content; free-machining grades cut cleanly, we plan each job around the grade to protect accuracy and surface quality.
CNC Gear Hobbing Capability for SPCC Steel
- Carbon/low-alloy grades
- Economical & weldable
- Tolerance to ±0.02 mm
- Hardenable by heat treat
SPCC Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 585 MPa |
| Yield strength (0.2%) | 450 MPa |
| Hardness | 170 HB |
| Melting point | 1420–1460 °C |
| Thermal conductivity | 51.9 W/m·K |
| Thermal expansion | 11.5 ×10⁻⁶/K |
| Electrical conductivity | 9% |
| Machinability (C36000 = 100%) | 57% |
| Grades we run | 1018, 1045, 1215, A36, S45C, St37, 4140 (see alloy steel) |
Published typical values for 1045. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Rust. Bare steel flash-rusts within hours in a humid container, so parts are oiled or passivated before packing unless you specify otherwise.
Machining SPCC Steel with CNC Gear Hobbing
The machinability of SPCC Steel is good to excellent depending on carbon content; free-machining grades cut cleanly. For CNC Gear Hobbing we select tooling, feeds, speeds and coolant to match, keeping the SPCC Steel workpiece stable and the result accurate.
Because we machine SPCC Steel regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Gear Hobbing SPCC Steel
| Feature | Standard | Precision |
|---|---|---|
| Accuracy class | DIN 8 / AGMA 10 | DIN 6 / AGMA 12 |
| Profile deviation | 0.020 mm | 0.008 mm |
| Lead deviation | 0.020 mm | 0.008 mm |
| Pitch deviation (cumulative) | 0.040 mm | 0.015 mm |
| Runout | 0.030 mm | 0.010 mm |
| Tooth surface finish | Ra 1.6 µm | Ra 0.4 µm (ground) |
| Module range | m0.5–m8 | m1–m6 |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why SPCC Steel?
Specifying SPCC Steel for CNC Gear Hobbing SPCC Steel is usually about its properties: strong, economical and widely available. Tell us the condition you need and we machine to it.
CNC Gear Hobbing Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on SPCC Steel parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Design Tips for CNC Gear Hobbing SPCC Steel
A few design choices make a real difference to cost and quality. Providing complete gear data (module, pressure angle, profile shift, quality class) lets us produce SPCC Steel gears right the first time. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
We complete SPCC Steel components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
CNC Gear Hobbing Tolerances & Surface Finish
Gear features are produced to a specified DIN/AGMA accuracy class, with profile and lead controlled for quiet, durable running under load.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC Gear Hobbing SPCC Steel
CNC Gear Hobbing of SPCC Steel supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Gear Hobbing SPCC Steel
Ordering SPCC Steel parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for SPCC Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Black oxide | 1–2 µm | Mild corrosion resistance, no dimensional change |
| Zinc plate + clear/yellow | 5–12 µm | ASTM B633, general corrosion protection |
| Nickel plate (electroless) | 10–25 µm | Uniform in bores, 500 HV after bake |
| Phosphate | 5–10 µm | Paint key, mild lubricity |
| Powder coat | 60–120 µm | RAL colours |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Gear Hobbing SPCC Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact SPCC Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
SPCC Steel in Other Processes
Related
Send the drawing, the SPCC Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
How clean are the edges produced by CNC Gear Hobbing on SPCC Steel?
Machined SPCC Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What is the typical lead time and minimum order for CNC Gear Hobbing SPCC Steel?
CNC Gear Hobbing prototypes for SPCC Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What gear accuracy class can you achieve on SPCC Steel?
Gear accuracy is specified to DIN/AGMA classes appropriate to the application. Profile and lead are controlled so SPCC Steel gears run accurately and quietly under load.
What is CNC Gear Hobbing SPCC Steel and how is it done?
CNC Gear Hobbing SPCC Steel refers to gear hobbing generates gear teeth with a rotating hob synchronized to the workpiece. Applied to SPCC Steel — strong, economical and widely available — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Which industries use CNC Gear Hobbing SPCC Steel parts?
CNC Gear Hobbing SPCC Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise SPCC Steel components are required.
Can VT machining make custom SPCC Steel parts to my drawing?
Yes. SPCC Steel SPCC Steel gear cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.