CNC Swiss Machining SPCC Steel

VT machining offers CNC Swiss Machining for SPCC Steel (JIS G3141 / ~DC01 / ~1008 CR), typically supplied cold-rolled sheet. Cold-rolled commercial sheet with clean surface for painting.

CNC Swiss Machining Notes for SPCC Steel

SPCC Steel can be Swiss-turned, but slower cutting data and guide-bushing clearances are set for this grade to protect slender features.

For estimating, a 100 × 100 × 10 mm block of SPCC Steel weighs about 0.79 kg.

Starting Parameters for CNC Swiss Machining SPCC Steel

Cutting speed (carbide)140-250 m/min
Feed0.1-0.35 mm/rev
Spindle speed, Ø8 mm bar5570-9950 rpm
Insert / tool classISO P — CVD-coated carbide
CoolantEmulsion (5-8%); dry is possible for interrupted cuts
Length-to-diameter capabilityup to ~10:1 (slower feeds for this grade)

Starting values for SPCC Steel, Cold-rolled sheet; optimised on the first article.

Full material data for SPCC Steel (JIS G3141 / ~DC01 / ~1008 CR) is on the CNC Turning SPCC Steel page.

More on CNC Swiss Machining Steel

Finishing options, quality documentation and general cnc swiss machining guidance for all steel grades are on our CNC Swiss Machining Steel page.

Quoting CNC Swiss Machining SPCC Steel

Send a STEP/IGES model or PDF drawing, confirm SPCC Steel and its condition (we usually see it supplied cold-rolled sheet), the quantity, critical tolerances and any finish or certificate requirements.

SPCC Steel in Other Processes

Related

Send the drawing, the SPCC Steel condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

What is the typical lead time and minimum order for CNC Swiss Machining SPCC Steel?

CNC Swiss Machining prototypes for SPCC Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.

What material thickness or size range suits CNC Swiss Machining SPCC Steel?

Turned SPCC Steel parts are produced from bar or chuck stock across a wide diameter range.

Can VT machining make custom SPCC Steel parts to my drawing?

Yes. SPCC Steel turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.

What surface finish is achievable on SPCC Steel with CNC Swiss Machining?

Surface finish on SPCC Steel is controlled to your specification; we confirm the achievable Ra against your callout.