VT machining specialises in CNC Cylindrical Grinding SPCC Steel. Because SPCC Steel is strong, economical and widely available, and its machinability is good to excellent depending on carbon content; free-machining grades cut cleanly, we plan each job around the grade to protect accuracy and surface quality.
CNC Cylindrical Grinding Capability for SPCC Steel
- Carbon/low-alloy grades
- Economical & weldable
- Tolerance to ±0.02 mm
- Hardenable by heat treat
SPCC Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 585 MPa |
| Yield strength (0.2%) | 450 MPa |
| Hardness | 170 HB |
| Melting point | 1420–1460 °C |
| Thermal conductivity | 51.9 W/m·K |
| Thermal expansion | 11.5 ×10⁻⁶/K |
| Electrical conductivity | 9% |
| Machinability (C36000 = 100%) | 57% |
| Grades we run | 1018, 1045, 1215, A36, S45C, St37, 4140 (see alloy steel) |
Published typical values for 1045. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Rust. Bare steel flash-rusts within hours in a humid container, so parts are oiled or passivated before packing unless you specify otherwise.
Machining SPCC Steel with CNC Cylindrical Grinding
SPCC Steel behaves predictably under CNC Cylindrical Grinding once parameters are dialled in: machinability is good to excellent depending on carbon content; free-machining grades cut cleanly, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of SPCC Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Cylindrical Grinding SPCC Steel
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Cylindrical Grinding SPCC Steel
We are happy to suggest design tweaks that improve manufacturability. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on SPCC Steel efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Finished SPCC Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Why SPCC Steel?
SPCC Steel is chosen when a part needs what this grade offers — it is strong, economical and widely available. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Cylindrical Grinding Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every SPCC Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
CNC Cylindrical Grinding Tolerances & Surface Finish
Ground SPCC Steel reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Cylindrical Grinding SPCC Steel
Customers order CNC Cylindrical Grinding SPCC Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Cylindrical Grinding SPCC Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for SPCC Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Black oxide | 1–2 µm | Mild corrosion resistance, no dimensional change |
| Zinc plate + clear/yellow | 5–12 µm | ASTM B633, general corrosion protection |
| Nickel plate (electroless) | 10–25 µm | Uniform in bores, 500 HV after bake |
| Phosphate | 5–10 µm | Paint key, mild lubricity |
| Powder coat | 60–120 µm | RAL colours |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Cylindrical Grinding SPCC Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact SPCC Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
SPCC Steel in Other Processes
Related
Send the drawing, the SPCC Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
How clean are the edges produced by CNC Cylindrical Grinding on SPCC Steel?
Machined SPCC Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What is CNC Cylindrical Grinding SPCC Steel and how is it done?
CNC Cylindrical Grinding SPCC Steel refers to cylindrical grinding finishes outer diameters of rotational parts to precise size and roundness. Applied to SPCC Steel — strong, economical and widely available — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Why is SPCC Steel a good choice for CNC Cylindrical Grinding?
SPCC Steel is strong, economical and widely available, which makes it well suited to CNC Cylindrical Grinding. We tune the process to the alloy so the finished SPCC Steel grinding part meets your dimensional and functional requirements.
Does CNC Cylindrical Grinding SPCC Steel require dedicated tooling?
Most SPCC Steel grinding work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What tolerances can you hold for CNC Cylindrical Grinding SPCC Steel?
Achievable tolerances for SPCC Steel grinding depend on the alloy, geometry and feature size. Grinding routinely holds single-micron tolerances on diameter, flatness and parallelism. Exact figures are confirmed against your drawing callouts.