CNC Cylindrical Grinding 5083 Aluminum is part of VT machining's grade-specific capability. 5083 Aluminum is lightweight with excellent machinability, and we combine controlled grinding with material-aware setup to produce parts that meet your specification.
CNC Cylindrical Grinding Capability for 5083 Aluminum
- Lightweight (~2.7 g/cm³)
- Excellent machinability
- Tolerance to ±0.01 mm
- Anodising-ready
5083 Aluminum Material Data
| Density | 2.70 g/cm³ |
|---|---|
| Tensile strength | 310 MPa |
| Yield strength (0.2%) | 276 MPa |
| Hardness | 95 HB |
| Melting point | 582–652 °C |
| Thermal conductivity | 167 W/m·K |
| Thermal expansion | 23.6 ×10⁻⁶/K |
| Electrical conductivity | 43% |
| Machinability (C36000 = 100%) | 190% |
| Grades we run | 6061, 6082, 6063, 7075-T6, 5052, 2024-T3, MIC-6 cast plate |
Published typical values for 6061-T6. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Thin walls relax after roughing. We rough, let the part stabilise, then finish — otherwise a 1.5 mm wall bows by more than the tolerance it was cut to.
Machining 5083 Aluminum with CNC Cylindrical Grinding
The machinability of 5083 Aluminum is excellent; high cutting speeds and superb finishes achievable. For CNC Cylindrical Grinding we select tooling, feeds, speeds and coolant to match, keeping the 5083 Aluminum workpiece stable and the result accurate.
Because we machine 5083 Aluminum regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Cylindrical Grinding 5083 Aluminum
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Cylindrical Grinding Tolerances & Surface Finish
Ground 5083 Aluminum reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Secondary Operations & Finishing
We complete 5083 Aluminum components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
CNC Cylindrical Grinding Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on 5083 Aluminum parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Design Tips for CNC Cylindrical Grinding 5083 Aluminum
A few design choices make a real difference to cost and quality. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on 5083 Aluminum efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
Why 5083 Aluminum?
Specifying 5083 Aluminum for CNC Cylindrical Grinding 5083 Aluminum is usually about its properties: lightweight with excellent machinability. Tell us the condition you need and we machine to it.
Applications of CNC Cylindrical Grinding 5083 Aluminum
CNC Cylindrical Grinding of 5083 Aluminum supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Cylindrical Grinding 5083 Aluminum
Ordering 5083 Aluminum parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for 5083 Aluminum
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Clear anodise (Type II) | 5–25 µm | Corrosion protection, keeps the natural colour |
| Colour anodise | 10–25 µm | Black, red, blue, gold; add 0.02 mm to close tolerances |
| Hard anodise (Type III) | 25–50 µm | 60–70 HRC surface, grows 50% into the part |
| Chromate / Alodine 1200 | < 1 µm | Conductive, meets MIL-DTL-5541 |
| Powder coat | 60–120 µm | RAL colours, needs 0.3 mm clearance on mating features |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Cylindrical Grinding 5083 Aluminum
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 5083 Aluminum grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
5083 Aluminum in Other Processes
Related
Send the drawing, the 5083 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom 5083 Aluminum parts to my drawing?
Yes. 5083 Aluminum 5083 Aluminum grinding is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What is the typical lead time and minimum order for CNC Cylindrical Grinding 5083 Aluminum?
CNC Cylindrical Grinding prototypes for 5083 Aluminum can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is 5083 Aluminum a good choice for CNC Cylindrical Grinding?
5083 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Cylindrical Grinding. We tune the process to the alloy so the finished 5083 Aluminum grinding part meets your dimensional and functional requirements.
What material thickness or size range suits CNC Cylindrical Grinding 5083 Aluminum?
We machine 5083 Aluminum across a broad size range; share your part envelope for confirmation.
Does CNC Cylindrical Grinding 5083 Aluminum require dedicated tooling?
Most 5083 Aluminum grinding work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
How clean are the edges produced by CNC Cylindrical Grinding on 5083 Aluminum?
Machined 5083 Aluminum edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.