CNC Boring 5005 Aluminum

VT machining offers CNC Boring for 5005 Aluminum (UNS A95005 / EN AW-5005), typically supplied H32 / H34. Low-Mg alloy chosen for uniform anodised appearance.

CNC Boring Notes for 5005 Aluminum

Boring bars for 5005 Aluminum are chosen for rigidity, allowing a single finishing pass for size and roundness.

For estimating, a 100 × 100 × 10 mm block of 5005 Aluminum weighs about 0.27 kg.

Starting Parameters for CNC Boring 5005 Aluminum

Cutting speed (carbide)340-850 m/min
Feed0.07-0.28 mm/rev
Spindle speed, Ø30 mm bore3610-9020 rpm
Insert / tool classISO N — sharp, polished, uncoated or DLC
CoolantEmulsion or MQL; polished uncoated or DLC tools

Starting values for 5005 Aluminum, H32 / H34; optimised on the first article.

Full material data for 5005 Aluminum (UNS A95005 / EN AW-5005) is on the CNC Turning 5005 Aluminum page.

More on CNC Boring Aluminum

Finishing options, quality documentation and general cnc boring guidance for all aluminum grades are on our CNC Boring Aluminum page.

Quoting CNC Boring 5005 Aluminum

Send a STEP/IGES model or PDF drawing, confirm 5005 Aluminum and its condition (we usually see it supplied H32 / H34), the quantity, critical tolerances and any finish or certificate requirements.

5005 Aluminum in Other Processes

Related

Send the drawing, the 5005 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

Why is 5005 Aluminum a good choice for CNC Boring?

5005 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Boring. We tune the process to the alloy so the finished 5005 Aluminum turning part meets your dimensional and functional requirements.

Does CNC Boring 5005 Aluminum require dedicated tooling?

Most 5005 Aluminum turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.

What material thickness or size range suits CNC Boring 5005 Aluminum?

Turned 5005 Aluminum parts are produced from bar or chuck stock across a wide diameter range.

Can VT machining make custom 5005 Aluminum parts to my drawing?

Yes. 5005 Aluminum turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.

What surface finish is achievable on 5005 Aluminum with CNC Boring?

Surface finish on 5005 Aluminum is controlled to your specification; we confirm the achievable Ra against your callout.