CNC Swiss Machining 5005 Aluminum

VT machining offers CNC Swiss Machining for 5005 Aluminum (UNS A95005 / EN AW-5005), typically supplied H32 / H34. Low-Mg alloy chosen for uniform anodised appearance.

CNC Swiss Machining Notes for 5005 Aluminum

5005 Aluminum can be Swiss-turned, but slower cutting data and guide-bushing clearances are set for this grade to protect slender features.

For estimating, a 100 × 100 × 10 mm block of 5005 Aluminum weighs about 0.27 kg.

Starting Parameters for CNC Swiss Machining 5005 Aluminum

Cutting speed (carbide)360-900 m/min
Feed0.1-0.4 mm/rev
Spindle speed, Ø8 mm bar14320-24000 rpm
Insert / tool classISO N — sharp, polished, uncoated or DLC
CoolantEmulsion or MQL; polished uncoated or DLC tools
Length-to-diameter capabilityup to ~10:1 (slower feeds for this grade)

Starting values for 5005 Aluminum, H32 / H34; optimised on the first article.

Full material data for 5005 Aluminum (UNS A95005 / EN AW-5005) is on the CNC Turning 5005 Aluminum page.

More on CNC Swiss Machining Aluminum

Finishing options, quality documentation and general cnc swiss machining guidance for all aluminum grades are on our CNC Swiss Machining Aluminum page.

Quoting CNC Swiss Machining 5005 Aluminum

Send a STEP/IGES model or PDF drawing, confirm 5005 Aluminum and its condition (we usually see it supplied H32 / H34), the quantity, critical tolerances and any finish or certificate requirements.

5005 Aluminum in Other Processes

Related

Send the drawing, the 5005 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

What is CNC Swiss Machining 5005 Aluminum and how is it done?

CNC Swiss Machining 5005 Aluminum refers to swiss-type machining guides bar stock through a sliding headstock for high-accuracy small, slender parts. Applied to 5005 Aluminum — lightweight with excellent machinability — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.

What surface finish is achievable on 5005 Aluminum with CNC Swiss Machining?

Surface finish on 5005 Aluminum is controlled to your specification; we confirm the achievable Ra against your callout.

Can VT machining make custom 5005 Aluminum parts to my drawing?

Yes. 5005 Aluminum turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.

What material thickness or size range suits CNC Swiss Machining 5005 Aluminum?

Turned 5005 Aluminum parts are produced from bar or chuck stock across a wide diameter range.