VT machining offers CNC Wire EDM for 1060 Steel (UNS G10600 / C60), typically supplied hot-rolled or annealed. High-carbon steel for springs and wear parts.
CNC Wire EDM Notes for 1060 Steel
Wire EDM cuts 1060 Steel with fine detail and sharp internal corners down to the wire radius.
Process Data for CNC Wire EDM 1060 Steel
| Area cutting rate (0.25 mm brass wire) | ~150 mm²/min |
|---|---|
| Linear speed at 10 mm thick | ~15 mm/min |
| Linear speed at 30 mm thick | ~5 mm/min |
| Linear speed at 60 mm thick | ~2.5 mm/min |
| Achievable accuracy | ±0.005 mm with 3-4 skim passes; Ra 0.4-0.8 µm |
Typical values for 1060 Steel, Hot-rolled or annealed; confirmed on the first part.
1060 Steel Data Relevant to CNC Wire EDM
| Equivalent designations | UNS G10600 / C60 |
|---|---|
| Hardness (typical) | ~180-230 HB |
| Density | 7.85 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Wire EDM Steel
Finishing options, quality documentation and general cnc wire edm guidance for all steel grades are on our CNC Wire EDM Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Wire EDM 1060 Steel
Send a STEP/IGES model or PDF drawing, confirm 1060 Steel and its condition (we usually see it supplied hot-rolled or annealed), the quantity, critical tolerances and any finish or certificate requirements.
1060 Steel in Other Processes
Related
Send the drawing, the 1060 Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Wire EDM 1060 Steel?
Achievable tolerances for 1060 Steel EDM machining depend on the alloy, geometry and feature size. EDM holds tolerances to around ±0.002 mm with no cutting force on the part. Exact figures are confirmed against your drawing callouts.
What is the typical lead time and minimum order for CNC Wire EDM 1060 Steel?
CNC Wire EDM prototypes for 1060 Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Can VT machining make custom 1060 Steel parts to my drawing?
Yes. 1060 Steel EDM machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Why is 1060 Steel a good choice for CNC Wire EDM?
1060 Steel is strong, economical and widely available, which makes it well suited to CNC Wire EDM. We tune the process to the alloy so the finished 1060 Steel EDM machining part meets your dimensional and functional requirements.
Can you EDM-machine hardened 1060 Steel?
Yes. EDM removes material by electrical discharge rather than cutting force, so hardened and difficult 1060 Steel can be machined to fine detail and tight tolerance without distortion.
What is CNC Wire EDM 1060 Steel and how is it done?
CNC Wire EDM 1060 Steel refers to wire EDM cuts conductive metal with a charged wire, achieving fine detail and tight tolerance with no cutting force. Applied to 1060 Steel — strong, economical and widely available — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.