VT machining offers CNC Wire EDM for 1060 Aluminum (UNS A91060 / EN AW-1060), typically supplied O / H14. Slightly purer than 1050 for higher electrical conductivity (~61% IACS).
CNC Wire EDM Notes for 1060 Aluminum
Wire EDM cuts 1060 Aluminum with fine detail and sharp internal corners down to the wire radius.
Process Data for CNC Wire EDM 1060 Aluminum
| Area cutting rate (0.25 mm brass wire) | ~300 mm²/min |
|---|---|
| Linear speed at 10 mm thick | ~30 mm/min |
| Linear speed at 30 mm thick | ~10 mm/min |
| Linear speed at 60 mm thick | ~5 mm/min |
| Achievable accuracy | ±0.005 mm with 3-4 skim passes; Ra 0.4-0.8 µm |
Typical values for 1060 Aluminum, O / H14; confirmed on the first part.
1060 Aluminum Data Relevant to CNC Wire EDM
| Equivalent designations | UNS A91060 / EN AW-1060 |
|---|---|
| Hardness (typical) | ~20-35 HB |
| Density | 2.71 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Wire EDM Aluminum
Finishing options, quality documentation and general cnc wire edm guidance for all aluminum grades are on our CNC Wire EDM Aluminum page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Wire EDM 1060 Aluminum
Send a STEP/IGES model or PDF drawing, confirm 1060 Aluminum and its condition (we usually see it supplied O / H14), the quantity, critical tolerances and any finish or certificate requirements.
1060 Aluminum in Other Processes
Related
Send the drawing, the 1060 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Wire EDM 1060 Aluminum?
Achievable tolerances for 1060 Aluminum EDM machining depend on the alloy, geometry and feature size. EDM holds tolerances to around ±0.002 mm with no cutting force on the part. Exact figures are confirmed against your drawing callouts.
What surface finish is achievable on 1060 Aluminum with CNC Wire EDM?
Surface finish on 1060 Aluminum is controlled to your specification; we confirm the achievable Ra against your callout.
What is the typical lead time and minimum order for CNC Wire EDM 1060 Aluminum?
CNC Wire EDM prototypes for 1060 Aluminum can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is 1060 Aluminum a good choice for CNC Wire EDM?
1060 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Wire EDM. We tune the process to the alloy so the finished 1060 Aluminum EDM machining part meets your dimensional and functional requirements.
Can you EDM-machine hardened 1060 Aluminum?
Yes. EDM removes material by electrical discharge rather than cutting force, so hardened and difficult 1060 Aluminum can be machined to fine detail and tight tolerance without distortion.