VT machining offers CNC Waterjet Cutting for 2507 Duplex Stainless Steel (UNS S32750 / 1.4410), typically supplied solution annealed. Super-duplex with PREN >40; harder to machine than 2205.
CNC Waterjet Cutting Notes for 2507 Duplex Stainless Steel
Waterjet cutting leaves 2507 Duplex Stainless Steel with no heat-affected zone, which matters when later machining or welding follows.
For estimating, a 100 × 100 × 10 mm block of 2507 Duplex Stainless Steel weighs about 0.78 kg.
Process Data for CNC Waterjet Cutting 2507 Duplex Stainless Steel
| Cutting speed at 10 mm | ~95 mm/min |
|---|---|
| Cutting speed at 25 mm | ~30 mm/min |
| Profile tolerance | ±0.1 mm; edge taper <0.05 mm with taper compensation |
| Heat-affected zone | None |
Typical values for 2507 Duplex Stainless Steel, Solution annealed; confirmed on the first part.
Full material data for 2507 Duplex Stainless Steel (UNS S32750 / 1.4410) is on the CNC Laser Cutting 2507 Duplex Stainless Steel page.
More on CNC Waterjet Cutting Stainless Steel
Finishing options, quality documentation and general cnc waterjet cutting guidance for all stainless steel grades are on our CNC Waterjet Cutting Stainless Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Waterjet Cutting 2507 Duplex Stainless Steel
Send a STEP/IGES model or PDF drawing, confirm 2507 Duplex Stainless Steel and its condition (we usually see it supplied solution annealed), the quantity, critical tolerances and any finish or certificate requirements.
2507 Duplex Stainless Steel in Other Processes
Related
Send the drawing, the 2507 Duplex Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is CNC Waterjet Cutting 2507 Duplex Stainless Steel and how is it done?
CNC Waterjet Cutting 2507 Duplex Stainless Steel refers to abrasive waterjet cutting erodes metal with a high-pressure abrasive stream, with no heat-affected zone. Applied to 2507 Duplex Stainless Steel — high-strength, chloride-corrosion-resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
How clean are the edges produced by CNC Waterjet Cutting on 2507 Duplex Stainless Steel?
Laser cutting leaves 2507 Duplex Stainless Steel with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.
Does CNC Waterjet Cutting 2507 Duplex Stainless Steel require dedicated tooling?
Most 2507 Duplex Stainless Steel cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Can VT machining make custom 2507 Duplex Stainless Steel parts to my drawing?
Yes. 2507 Duplex Stainless Steel cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Why is 2507 Duplex Stainless Steel a good choice for CNC Waterjet Cutting?
2507 Duplex Stainless Steel is high-strength, chloride-corrosion-resistant, which makes it well suited to CNC Waterjet Cutting. We tune the process to the alloy so the finished 2507 Duplex Stainless Steel cutting part meets your dimensional and functional requirements.
What is the typical lead time and minimum order for CNC Waterjet Cutting 2507 Duplex Stainless Steel?
CNC Waterjet Cutting prototypes for 2507 Duplex Stainless Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.