CNC Turning Tungsten from VT machining delivers precision Tungsten parts produced to your exact drawing. CNC turning rotates the workpiece against a single-point tool to produce cylindrical features, threads and grooves, and we tune every parameter to the behaviour of Tungsten, which is extreme hardness, density and heat resistance.
CNC Turning Capability for Tungsten
- Diameter tolerance to ±0.005 mm
- Concentricity within 0.01 mm
- OD/ID, threading, grooving
- Bar and chuck work
Tungsten Material Data
| Density | 19.25 g/cm³ |
|---|---|
| Tensile strength | 750–1500 MPa |
| Yield strength (0.2%) | 550 MPa |
| Hardness | 350–500 HV |
| Melting point | 3422 °C |
| Thermal conductivity | 173 W/m·K |
| Thermal expansion | 4.5 ×10⁻⁶/K |
| Electrical conductivity | 31% |
| Machinability (C36000 = 100%) | grind / EDM only |
| Grades we run | Pure W (99.95%), W-Ni-Fe heavy alloy (17.0–18.5 g/cm³), WC-Co |
Published typical values for Pure W / W-Ni-Fe. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Conventional cutting is not on the table for pure tungsten. Features are wire-EDM cut and ground; expect longer lead time than any other metal on the list.
How CNC Turning Tungsten Works
The Tungsten bar or billet rotates in the spindle while single-point tools shape outer diameters, bores, faces, grooves and threads. Constant surface speed control keeps cutting conditions stable from large to small diameters.
Every job begins from your CAD model or 2D drawing. Fixturing and tool paths are planned so the most critical dimensions are produced in the most rigid, repeatable setup. Critical dimensions are checked on the first part and monitored through the run.
Achievable Tolerances for CNC Turning Tungsten
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Working with Tungsten
Tungsten offers a useful combination of properties: it is extreme hardness, density and heat resistance. Those characteristics shape how we approach turning — from tool and parameter selection to work-holding and coolant.
If your application is sensitive to alloy condition, we agree the specification in writing and document it. Stock is sourced from reputable suppliers so what you order is what you receive.
Design Tips for CNC Turning Tungsten
A few design choices make a real difference to cost and quality. Consistent diameters, standard thread forms and avoiding extremely long, slender features help Tungsten turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Turning Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on Tungsten parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Secondary Operations & Finishing
We complete Tungsten components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
CNC Turning Tolerances & Surface Finish
Turned Tungsten holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Turning Tungsten
CNC Turning of Tungsten supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Turning Tungsten
Ordering Tungsten parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Parts We Have Run in Tungsten
Three representative CNC Turning Tungsten jobs, with the callouts that actually drove the process plan. Yours will differ — these are here so you can judge whether your part is in our range before you spend time on an RFQ.
Connector pin
- Material
- Tungsten
- Size
- Ø3.0 × 24 mm
- Key callouts
- OD ±0.005 mm, straightness 0.02 mm over length
- Batch
- 20,000 pcs
Swiss-turned from bar with a guide bushing; nothing else holds Ø3 mm over 24 mm.
Threaded fitting
- Material
- Tungsten
- Size
- Ø22 hex × 38 mm
- Key callouts
- G3/8" thread class 4h, bore H8, sealing face Ra 0.8 µm
- Batch
- 2,500 pcs
Run on a sub-spindle lathe so the back face is finished without a second setup.
Precision shaft
- Material
- Tungsten
- Size
- Ø16 × 240 mm
- Key callouts
- OD h6, concentricity 0.01 mm TIR, keyway 5 H9
- Batch
- 1,000 pcs / year
Turned between centres so both journals share one datum.
Finishing Options for Tungsten
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Turning Tungsten
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Tungsten grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Turning
Other Processes for Tungsten
Send the drawing, the Tungsten grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Turning Tungsten?
CNC Turning prototypes for Tungsten can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is Tungsten a good choice for CNC Turning?
Tungsten is extreme hardness, density and heat resistance, which makes it well suited to CNC Turning. We tune the process to the alloy so the finished Tungsten turning part meets your dimensional and functional requirements.
What is CNC Turning Tungsten and how is it done?
CNC Turning Tungsten refers to cNC turning rotates the workpiece against a single-point tool to produce cylindrical features, threads and grooves. Applied to Tungsten — extreme hardness, density and heat resistance — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What surface finish is achievable on Tungsten with CNC Turning?
Surface finish on Tungsten is controlled to your specification; we confirm the achievable Ra against your callout.
What material thickness or size range suits CNC Turning Tungsten?
Turned Tungsten parts are produced from bar or chuck stock across a wide diameter range.
Can VT machining make custom Tungsten parts to my drawing?
Yes. Tungsten Tungsten turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.