VT machining provides CNC Turning 2014 Aluminum for customers who need accurate, repeatable 2014 Aluminum components. The machinability of 2014 Aluminum is excellent; high cutting speeds and superb finishes achievable, so we set the operation up specifically for this grade.
CNC Turning Capability for 2014 Aluminum
- Lightweight (~2.7 g/cm³)
- Excellent machinability
- Tolerance to ±0.01 mm
- Anodising-ready
Machining 2014 Aluminum with CNC Turning
2014 Aluminum behaves predictably under CNC Turning once parameters are dialled in: machinability is excellent; high cutting speeds and superb finishes achievable, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of 2014 Aluminum run consistently from one batch to the next.
Secondary Operations & Finishing
Finished 2014 Aluminum parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Design Tips for CNC Turning 2014 Aluminum
We are happy to suggest design tweaks that improve manufacturability. Consistent diameters, standard thread forms and avoiding extremely long, slender features help 2014 Aluminum turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Turning Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every 2014 Aluminum part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Why 2014 Aluminum?
2014 Aluminum is chosen when a part needs what this grade offers — it is lightweight with excellent machinability. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Turning Tolerances & Surface Finish
Turned 2014 Aluminum holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Turning 2014 Aluminum
Customers order CNC Turning 2014 Aluminum components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Turning 2014 Aluminum
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
2014 Aluminum in Other Processes
Related
Need CNC Turning 2014 Aluminum for your project? Send your drawing and quantity for a fast quotation.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Turning 2014 Aluminum?
Achievable tolerances for 2014 Aluminum turning depend on the alloy, geometry and feature size. Turning holds diameter tolerances to around ±0.005 mm with concentricity within 0.01 mm. Exact figures are confirmed against your drawing callouts.
How clean are the edges produced by CNC Turning on 2014 Aluminum?
Machined 2014 Aluminum edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What is the typical lead time and minimum order for CNC Turning 2014 Aluminum?
CNC Turning prototypes for 2014 Aluminum can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What is CNC Turning 2014 Aluminum and how is it done?
CNC Turning 2014 Aluminum refers to cNC turning rotates the workpiece against a single-point tool to produce cylindrical features, threads and grooves. Applied to 2014 Aluminum — lightweight with excellent machinability — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Why is 2014 Aluminum a good choice for CNC Turning?
2014 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Turning. We tune the process to the alloy so the finished 2014 Aluminum turning part meets your dimensional and functional requirements.