Looking for reliable CNC Thread Grinding Steel? VT machining manufactures Steel parts to tight tolerances and consistent quality. Steel is strong, economical, widely available carbon/alloy grades, so the process is set up specifically for the material.
Process Data for CNC Thread Grinding Steel
| Wheel (supply condition) | Aluminium oxide, medium grade |
|---|---|
| Depth per pass (rough / finish) | 0.01-0.03 / 0.002-0.005 mm |
| Achievable finish | Ra 0.2-0.4 µm |
| Typical size tolerance | Thread class 4h / lead ±0.003 mm per 25 mm |
Shown for 1018 Steel, the most common Steel grade we see for CNC Thread Grinding. Typical values for 1018 Steel, Cold-drawn; confirmed on the first part.
CNC Thread Grinding Capability for Steel
- Pitch accuracy to grade 3
- Hardened-part threading
- Lead screws & gauges
- Fine surface finish
Steel material properties, finishing options and grade notes are on our CNC Surface Grinding Steel page.
How CNC Thread Grinding Steel Works
An abrasive wheel removes a fine, controlled layer from the Steel part. Wheel specification, dressing interval, infeed and coolant are matched to the alloy's hardness so the surface is not burned or left with residual stress.
Programming is driven directly by your 3D model or print. Work-holding, tool selection and the cutting strategy are planned around the critical features and the material before the first chip is cut. First-off inspection confirms the process is centred before production continues.
Achievable Tolerances for CNC Thread Grinding Steel
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Thread Grinding Tolerances & Surface Finish
Ground Steel reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Design Tips for CNC Thread Grinding Steel
We are happy to suggest design tweaks that improve manufacturability. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on Steel efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Thread Grinding Steel
Customers order CNC Thread Grinding Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
Typical Steel Parts for CNC Thread Grinding
Illustrative examples of CNC Thread Grinding Steel parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Slitter blade
- Material
- Steel
- Size
- Ø150 × 1.5 mm
- Key callouts
- Thickness ±0.005 mm, edge concentricity 0.005 mm
- Batch
- 400 pcs
Ground in a stack so all blades in a set share the same thickness.
Gauge block set
- Material
- Steel
- Size
- 50 × 30 × 10 mm
- Key callouts
- Thickness ±0.002 mm, flatness 0.002 mm, parallelism 0.002 mm
- Batch
- 200 pcs
Ground wet in one chucking, then left to normalise before final inspection at 20 °C.
Punch tool
- Material
- Steel
- Size
- Ø10 × 60 mm
- Key callouts
- OD ±0.002 mm, roundness 0.002 mm, Ra 0.1 µm
- Batch
- 300 pcs
Cylindrical ground after hardening to 60 HRC — machining soft would not hold the size.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Thread Grinding Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Thread Grinding
Other Processes for Steel
Send the drawing, the Steel grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
How clean are the edges produced by CNC Thread Grinding on Steel?
Machined Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Which industries use CNC Thread Grinding Steel parts?
CNC Thread Grinding Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Steel components are required.
What material thickness or size range suits CNC Thread Grinding Steel?
We machine Steel across a broad size range; share your part envelope for confirmation.
What surface finish is achievable on Steel with CNC Thread Grinding?
Grinding can take Steel to a fine finish — typically Ra 0.1–0.4 µm, and to a mirror grade on suitable alloys.
Can VT machining make custom Steel parts to my drawing?
Yes. Steel grinding is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.