CNC Thread Grinding C122 Copper is part of VT machining's grade-specific capability. C122 Copper is excellent electrical and thermal conductivity, and we combine controlled grinding with material-aware setup to produce parts that meet your specification.
CNC Thread Grinding Capability for C122 Copper
- Excellent conductivity
- Thermal management
- Tolerance to ±0.02 mm
- Solderable
C122 Copper Material Data
| Density | 8.94 g/cm³ |
|---|---|
| Tensile strength | 220–350 MPa |
| Yield strength (0.2%) | 70–330 MPa |
| Hardness | 40–100 HV |
| Melting point | 1083 °C |
| Thermal conductivity | 391 W/m·K |
| Thermal expansion | 17.0 ×10⁻⁶/K |
| Electrical conductivity | 101% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C10100 OFE, C10200 OF, C11000 ETP, C14500 tellurium copper |
Published typical values for C11000 ETP. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It smears rather than cuts. Razor-sharp uncoated tooling and high rake; if the print allows it, C14500 tellurium copper machines four times better at ~90% IACS.
Machining C122 Copper with CNC Thread Grinding
The machinability of C122 Copper is moderate; gummy, so sharp tooling and coolant are used. For CNC Thread Grinding we select tooling, feeds, speeds and coolant to match, keeping the C122 Copper workpiece stable and the result accurate.
Because we machine C122 Copper regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Thread Grinding C122 Copper
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Thread Grinding Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on C122 Copper parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Why C122 Copper?
Specifying C122 Copper for CNC Thread Grinding C122 Copper is usually about its properties: excellent electrical and thermal conductivity. Tell us the condition you need and we machine to it.
Design Tips for CNC Thread Grinding C122 Copper
A few design choices make a real difference to cost and quality. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on C122 Copper efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Thread Grinding Tolerances & Surface Finish
Ground C122 Copper reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Secondary Operations & Finishing
We complete C122 Copper components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Applications of CNC Thread Grinding C122 Copper
CNC Thread Grinding of C122 Copper supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Thread Grinding C122 Copper
Ordering C122 Copper parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for C122 Copper
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Tin plate | 3–15 µm | Solderable, prevents oxidation |
| Silver plate | 2–10 µm | Lowest contact resistance for RF and power |
| Nickel underplate | 2–5 µm | Diffusion barrier under tin or gold |
| Gold flash | 0.05–1 µm | Contact surfaces, over nickel |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Thread Grinding C122 Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C122 Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C122 Copper in Other Processes
Related
Send the drawing, the C122 Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What surface finish is achievable on C122 Copper with CNC Thread Grinding?
Grinding can take C122 Copper to a fine finish — typically Ra 0.1–0.4 µm, and to a mirror grade on suitable alloys.
What tolerances can you hold for CNC Thread Grinding C122 Copper?
Achievable tolerances for C122 Copper grinding depend on the alloy, geometry and feature size. Grinding routinely holds single-micron tolerances on diameter, flatness and parallelism. Exact figures are confirmed against your drawing callouts.
How clean are the edges produced by CNC Thread Grinding on C122 Copper?
Machined C122 Copper edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Which industries use CNC Thread Grinding C122 Copper parts?
CNC Thread Grinding C122 Copper parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C122 Copper components are required.
What is the typical lead time and minimum order for CNC Thread Grinding C122 Copper?
CNC Thread Grinding prototypes for C122 Copper can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is C122 Copper a good choice for CNC Thread Grinding?
C122 Copper is excellent electrical and thermal conductivity, which makes it well suited to CNC Thread Grinding. We tune the process to the alloy so the finished C122 Copper grinding part meets your dimensional and functional requirements.