CNC Tapping Inconel 600

VT machining offers CNC Tapping for Inconel 600 (UNS N06600 / 2.4816), typically supplied annealed. Non-hardenable Ni-Cr alloy for oxidation and chloride-SCC resistance.

CNC Tapping Notes for Inconel 600

Inconel 600 is tapped with cut taps (spiral-point for through holes) and controlled rigid-tapping speed; thread milling is used where tap breakage would be costly.

For estimating, a 100 × 100 × 10 mm block of Inconel 600 weighs about 0.85 kg.

Starting Parameters for CNC Tapping Inconel 600

Cutting speed (carbide)5-10 m/min
Recommended tapCut tap: spiral-point (through) / spiral-flute (blind)
Tap drill for M8×1.25Ø6.8 mm (cut tap)
Spindle speed, M8200-400 rpm
Insert / tool classISO S — sharp PVD-coated carbide
CoolantHigh-pressure emulsion; ceramic inserts run dry for roughing

Starting values for Inconel 600, Annealed; optimised on the first article.

Full material data for Inconel 600 (UNS N06600 / 2.4816) is on the CNC Milling Inconel 600 page.

More on CNC Tapping Inconel

Finishing options, quality documentation and general cnc tapping guidance for all inconel grades are on our CNC Tapping Inconel page.

Quoting CNC Tapping Inconel 600

Send a STEP/IGES model or PDF drawing, confirm Inconel 600 and its condition (we usually see it supplied annealed), the quantity, critical tolerances and any finish or certificate requirements.

Inconel 600 in Other Processes

Related

Send the drawing, the Inconel 600 condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

How clean are the edges produced by CNC Tapping on Inconel 600?

Machined Inconel 600 edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.

Why is Inconel 600 a good choice for CNC Tapping?

Inconel 600 is high-temperature strength and oxidation resistance, which makes it well suited to CNC Tapping. We tune the process to the alloy so the finished Inconel 600 machining part meets your dimensional and functional requirements.

What surface finish is achievable on Inconel 600 with CNC Tapping?

Surface finish on Inconel 600 is controlled to your specification; we confirm the achievable Ra against your callout.

What is the typical lead time and minimum order for CNC Tapping Inconel 600?

CNC Tapping prototypes for Inconel 600 can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.

Does CNC Tapping Inconel 600 require dedicated tooling?

Most Inconel 600 machining work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.