VT machining offers CNC Swiss Machining for Inconel 600 (UNS N06600 / 2.4816), typically supplied annealed. Non-hardenable Ni-Cr alloy for oxidation and chloride-SCC resistance.
CNC Swiss Machining Notes for Inconel 600
Inconel 600 can be Swiss-turned, but slower cutting data and guide-bushing clearances are set for this grade to protect slender features.
For estimating, a 100 × 100 × 10 mm block of Inconel 600 weighs about 0.85 kg.
Starting Parameters for CNC Swiss Machining Inconel 600
| Cutting speed (carbide) | 25-55 m/min |
|---|---|
| Feed | 0.05-0.15 mm/rev |
| Spindle speed, Ø8 mm bar | 990-2190 rpm |
| Insert / tool class | ISO S — sharp PVD-coated carbide |
| Coolant | High-pressure emulsion; ceramic inserts run dry for roughing |
| Length-to-diameter capability | up to ~10:1 (slower feeds for this grade) |
Starting values for Inconel 600, Annealed; optimised on the first article.
Full material data for Inconel 600 (UNS N06600 / 2.4816) is on the CNC Turning Inconel 600 page.
More on CNC Swiss Machining Inconel
Finishing options, quality documentation and general cnc swiss machining guidance for all inconel grades are on our CNC Swiss Machining Inconel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Swiss Machining Inconel 600
Send a STEP/IGES model or PDF drawing, confirm Inconel 600 and its condition (we usually see it supplied annealed), the quantity, critical tolerances and any finish or certificate requirements.
Inconel 600 in Other Processes
Related
Send the drawing, the Inconel 600 condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is CNC Swiss Machining Inconel 600 and how is it done?
CNC Swiss Machining Inconel 600 refers to swiss-type machining guides bar stock through a sliding headstock for high-accuracy small, slender parts. Applied to Inconel 600 — high-temperature strength and oxidation resistance — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Can VT machining make custom Inconel 600 parts to my drawing?
Yes. Inconel 600 turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Does CNC Swiss Machining Inconel 600 require dedicated tooling?
Most Inconel 600 turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What is the typical lead time and minimum order for CNC Swiss Machining Inconel 600?
CNC Swiss Machining prototypes for Inconel 600 can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.