VT machining provides CNC Swiss Machining Grade 2 Titanium for customers who need accurate, repeatable Grade 2 Titanium components. The machinability of Grade 2 Titanium is difficult; low speeds, high feeds, flood coolant to manage heat, so we set the operation up specifically for this grade.
CNC Swiss Machining Capability for Grade 2 Titanium
- High strength-to-weight
- Biocompatible
- Corrosion resistant
- Tolerance to ±0.01 mm
Machining Grade 2 Titanium with CNC Swiss Machining
Grade 2 Titanium behaves predictably under CNC Swiss Machining once parameters are dialled in: machinability is difficult; low speeds, high feeds, flood coolant to manage heat, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of Grade 2 Titanium run consistently from one batch to the next.
CNC Swiss Machining Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every Grade 2 Titanium part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Secondary Operations & Finishing
Finished Grade 2 Titanium parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Swiss Machining Tolerances & Surface Finish
Turned Grade 2 Titanium holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Why Grade 2 Titanium?
Grade 2 Titanium is chosen when a part needs what this grade offers — it is high strength-to-weight, biocompatible and corrosion resistant. We confirm the grade and any temper or heat-treat condition with you before machining.
Design Tips for CNC Swiss Machining Grade 2 Titanium
We are happy to suggest design tweaks that improve manufacturability. Consistent diameters, standard thread forms and avoiding extremely long, slender features help Grade 2 Titanium turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Swiss Machining Grade 2 Titanium
Customers order CNC Swiss Machining Grade 2 Titanium components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Swiss Machining Grade 2 Titanium
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Grade 2 Titanium in Other Processes
Related
Need CNC Swiss Machining Grade 2 Titanium for your project? Send your drawing and quantity for a fast quotation.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Swiss Machining Grade 2 Titanium?
Turned Grade 2 Titanium parts are produced from bar or chuck stock across a wide diameter range.
Can VT machining make custom Grade 2 Titanium parts to my drawing?
Yes. Grade 2 Titanium Grade 2 Titanium turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
How clean are the edges produced by CNC Swiss Machining on Grade 2 Titanium?
Machined Grade 2 Titanium edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Does CNC Swiss Machining Grade 2 Titanium require dedicated tooling?
Most Grade 2 Titanium turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Why is Grade 2 Titanium a good choice for CNC Swiss Machining?
Grade 2 Titanium is high strength-to-weight, biocompatible and corrosion resistant, which makes it well suited to CNC Swiss Machining. We tune the process to the alloy so the finished Grade 2 Titanium turning part meets your dimensional and functional requirements.