CNC Lathe Machining Grade 2 Titanium

VT machining offers CNC Lathe Machining for Grade 2 Titanium (UNS R50400 / ASTM B348 Gr2 / TA2), typically supplied annealed. Workhorse CP titanium: balance of strength, formability and corrosion resistance.

CNC Lathe Machining Notes for Grade 2 Titanium

On the lathe Grade 2 Titanium needs chip-breaker inserts and constant chip load to avoid long, stringy swarf.

For estimating, a 100 × 100 × 10 mm block of Grade 2 Titanium weighs about 0.45 kg.

Starting Parameters for CNC Lathe Machining Grade 2 Titanium

Cutting speed (carbide)45-100 m/min
Feed0.08-0.2 mm/rev
Spindle speed, Ø25 mm bar570-1270 rpm
Insert / tool classISO S — sharp PVD-coated carbide
CoolantHigh-pressure flood emulsion (70 bar+ through-tool where possible)
Max turning diameterØ350 mm (chuck work)

Starting values for Grade 2 Titanium, Annealed; optimised on the first article.

Full material data for Grade 2 Titanium (UNS R50400 / ASTM B348 Gr2 / TA2) is on the CNC Turning Grade 2 Titanium page.

More on CNC Lathe Machining Titanium

Finishing options, quality documentation and general cnc lathe machining guidance for all titanium grades are on our CNC Lathe Machining Titanium page.

Quoting CNC Lathe Machining Grade 2 Titanium

Send a STEP/IGES model or PDF drawing, confirm Grade 2 Titanium and its condition (we usually see it supplied annealed), the quantity, critical tolerances and any finish or certificate requirements.

Grade 2 Titanium in Other Processes

Related

Send the drawing, the Grade 2 Titanium condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

What is CNC Lathe Machining Grade 2 Titanium and how is it done?

CNC Lathe Machining Grade 2 Titanium refers to cNC lathe machining produces precision rotational parts with combined turning, facing, drilling and threading. Applied to Grade 2 Titanium — high strength-to-weight, biocompatible and corrosion resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.

What surface finish is achievable on Grade 2 Titanium with CNC Lathe Machining?

Surface finish on Grade 2 Titanium is controlled to your specification; we confirm the achievable Ra against your callout.

What is the typical lead time and minimum order for CNC Lathe Machining Grade 2 Titanium?

CNC Lathe Machining prototypes for Grade 2 Titanium can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.

Can VT machining make custom Grade 2 Titanium parts to my drawing?

Yes. Grade 2 Titanium turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.

Does CNC Lathe Machining Grade 2 Titanium require dedicated tooling?

Most Grade 2 Titanium turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.