CNC Swiss Machining 1070 Aluminum is part of VT machining's grade-specific capability. 1070 Aluminum is lightweight with excellent machinability, and we combine controlled turning with material-aware setup to produce parts that meet your specification.
CNC Swiss Machining Capability for 1070 Aluminum
- Lightweight (~2.7 g/cm³)
- Excellent machinability
- Tolerance to ±0.01 mm
- Anodising-ready
1070 Aluminum Material Data
| Density | 2.70 g/cm³ |
|---|---|
| Tensile strength | 310 MPa |
| Yield strength (0.2%) | 276 MPa |
| Hardness | 95 HB |
| Melting point | 582–652 °C |
| Thermal conductivity | 167 W/m·K |
| Thermal expansion | 23.6 ×10⁻⁶/K |
| Electrical conductivity | 43% |
| Machinability (C36000 = 100%) | 190% |
| Grades we run | 6061, 6082, 6063, 7075-T6, 5052, 2024-T3, MIC-6 cast plate |
Published typical values for 6061-T6. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Thin walls relax after roughing. We rough, let the part stabilise, then finish — otherwise a 1.5 mm wall bows by more than the tolerance it was cut to.
Machining 1070 Aluminum with CNC Swiss Machining
The machinability of 1070 Aluminum is excellent; high cutting speeds and superb finishes achievable. For CNC Swiss Machining we select tooling, feeds, speeds and coolant to match, keeping the 1070 Aluminum workpiece stable and the result accurate.
Because we machine 1070 Aluminum regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Swiss Machining 1070 Aluminum
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why 1070 Aluminum?
Specifying 1070 Aluminum for CNC Swiss Machining 1070 Aluminum is usually about its properties: lightweight with excellent machinability. Tell us the condition you need and we machine to it.
Design Tips for CNC Swiss Machining 1070 Aluminum
A few design choices make a real difference to cost and quality. Consistent diameters, standard thread forms and avoiding extremely long, slender features help 1070 Aluminum turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Swiss Machining Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on 1070 Aluminum parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Secondary Operations & Finishing
We complete 1070 Aluminum components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
CNC Swiss Machining Tolerances & Surface Finish
Turned 1070 Aluminum holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC Swiss Machining 1070 Aluminum
CNC Swiss Machining of 1070 Aluminum supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Swiss Machining 1070 Aluminum
Ordering 1070 Aluminum parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for 1070 Aluminum
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Clear anodise (Type II) | 5–25 µm | Corrosion protection, keeps the natural colour |
| Colour anodise | 10–25 µm | Black, red, blue, gold; add 0.02 mm to close tolerances |
| Hard anodise (Type III) | 25–50 µm | 60–70 HRC surface, grows 50% into the part |
| Chromate / Alodine 1200 | < 1 µm | Conductive, meets MIL-DTL-5541 |
| Powder coat | 60–120 µm | RAL colours, needs 0.3 mm clearance on mating features |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Swiss Machining 1070 Aluminum
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 1070 Aluminum grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
1070 Aluminum in Other Processes
Related
Send the drawing, the 1070 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Does CNC Swiss Machining 1070 Aluminum require dedicated tooling?
Most 1070 Aluminum turning work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Why is 1070 Aluminum a good choice for CNC Swiss Machining?
1070 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Swiss Machining. We tune the process to the alloy so the finished 1070 Aluminum turning part meets your dimensional and functional requirements.
What surface finish is achievable on 1070 Aluminum with CNC Swiss Machining?
Surface finish on 1070 Aluminum is controlled to your specification; we confirm the achievable Ra against your callout.
What is the typical lead time and minimum order for CNC Swiss Machining 1070 Aluminum?
CNC Swiss Machining prototypes for 1070 Aluminum can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Can VT machining make custom 1070 Aluminum parts to my drawing?
Yes. 1070 Aluminum 1070 Aluminum turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
How clean are the edges produced by CNC Swiss Machining on 1070 Aluminum?
Machined 1070 Aluminum edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.