CNC Surface Grinding C510 Phosphor Bronze from VT machining delivers precision C510 Phosphor Bronze parts made to your exact drawing. Surface grinding produces flat, parallel faces with fine finish using a horizontal abrasive wheel, with parameters tuned to C510 Phosphor Bronze, which is springy, low-friction and corrosion-resistant.
CNC Surface Grinding Capability for C510 Phosphor Bronze
- Spring temper available
- Good fatigue life
- Corrosion resistant
- Low-friction
C510 Phosphor Bronze Material Data
| Density | 8.86 g/cm³ |
|---|---|
| Tensile strength | 325–965 MPa |
| Yield strength (0.2%) | 140–550 MPa |
| Hardness | 60–200 HV |
| Melting point | 975–1060 °C |
| Thermal conductivity | 69 W/m·K |
| Thermal expansion | 17.8 ×10⁻⁶/K |
| Electrical conductivity | 15% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C51000, C51900, C52100, C54400 free-cutting |
Published typical values for C51000. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Spring temper is destroyed by heat. Contacts and spring fingers are etched or wire-EDM cut, never laser cut.
Machining C510 Phosphor Bronze with CNC Surface Grinding
When grinding C510 Phosphor Bronze, machinability is good; springy with excellent fatigue life. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for C510 Phosphor Bronze mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Surface Grinding C510 Phosphor Bronze
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Surface Grinding Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Design Tips for CNC Surface Grinding C510 Phosphor Bronze
Small design adjustments often cut cost and lead time. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on C510 Phosphor Bronze efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
Why C510 Phosphor Bronze?
Customers select C510 Phosphor Bronze for CNC Surface Grinding because it is springy, low-friction and corrosion-resistant. We handle grade verification and any required heat treatment or finishing.
Secondary Operations & Finishing
Most C510 Phosphor Bronze parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
CNC Surface Grinding Tolerances & Surface Finish
Ground C510 Phosphor Bronze reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Applications of CNC Surface Grinding C510 Phosphor Bronze
C510 Phosphor Bronze parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Surface Grinding C510 Phosphor Bronze
Starting your project takes one email. Send your CAD or 2D drawing, the C510 Phosphor Bronze grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for C510 Phosphor Bronze
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Surface Grinding C510 Phosphor Bronze
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C510 Phosphor Bronze grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C510 Phosphor Bronze in Other Processes
Related
Send the drawing, the C510 Phosphor Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Surface Grinding C510 Phosphor Bronze?
We machine C510 Phosphor Bronze across a broad size range; share your part envelope for confirmation.
Can VT machining make custom C510 Phosphor Bronze parts to my drawing?
Yes. C510 Phosphor Bronze C510 Phosphor Bronze grinding is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Surface Grinding C510 Phosphor Bronze?
Achievable tolerances for C510 Phosphor Bronze grinding depend on the alloy, geometry and feature size. Grinding routinely holds single-micron tolerances on diameter, flatness and parallelism. Exact figures are confirmed against your drawing callouts.
Why is C510 Phosphor Bronze a good choice for CNC Surface Grinding?
C510 Phosphor Bronze is springy, low-friction and corrosion-resistant, which makes it well suited to CNC Surface Grinding. We tune the process to the alloy so the finished C510 Phosphor Bronze grinding part meets your dimensional and functional requirements.