VT machining specialises in CNC Cylindrical Grinding C510 Phosphor Bronze. Because C510 Phosphor Bronze is springy, low-friction and corrosion-resistant, and its machinability is good; springy with excellent fatigue life, we plan each job around the grade to protect accuracy and surface quality.
CNC Cylindrical Grinding Capability for C510 Phosphor Bronze
- Spring temper available
- Good fatigue life
- Corrosion resistant
- Low-friction
C510 Phosphor Bronze Material Data
| Density | 8.86 g/cm³ |
|---|---|
| Tensile strength | 325–965 MPa |
| Yield strength (0.2%) | 140–550 MPa |
| Hardness | 60–200 HV |
| Melting point | 975–1060 °C |
| Thermal conductivity | 69 W/m·K |
| Thermal expansion | 17.8 ×10⁻⁶/K |
| Electrical conductivity | 15% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C51000, C51900, C52100, C54400 free-cutting |
Published typical values for C51000. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Spring temper is destroyed by heat. Contacts and spring fingers are etched or wire-EDM cut, never laser cut.
Machining C510 Phosphor Bronze with CNC Cylindrical Grinding
C510 Phosphor Bronze behaves predictably under CNC Cylindrical Grinding once parameters are dialled in: machinability is good; springy with excellent fatigue life, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of C510 Phosphor Bronze run consistently from one batch to the next.
Achievable Tolerances for CNC Cylindrical Grinding C510 Phosphor Bronze
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why C510 Phosphor Bronze?
C510 Phosphor Bronze is chosen when a part needs what this grade offers — it is springy, low-friction and corrosion-resistant. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Cylindrical Grinding Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every C510 Phosphor Bronze part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Design Tips for CNC Cylindrical Grinding C510 Phosphor Bronze
We are happy to suggest design tweaks that improve manufacturability. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on C510 Phosphor Bronze efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Cylindrical Grinding Tolerances & Surface Finish
Ground C510 Phosphor Bronze reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Secondary Operations & Finishing
Finished C510 Phosphor Bronze parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Applications of CNC Cylindrical Grinding C510 Phosphor Bronze
Customers order CNC Cylindrical Grinding C510 Phosphor Bronze components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Cylindrical Grinding C510 Phosphor Bronze
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for C510 Phosphor Bronze
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Cylindrical Grinding C510 Phosphor Bronze
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C510 Phosphor Bronze grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C510 Phosphor Bronze in Other Processes
Related
Send the drawing, the C510 Phosphor Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Cylindrical Grinding C510 Phosphor Bronze?
CNC Cylindrical Grinding prototypes for C510 Phosphor Bronze can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
How clean are the edges produced by CNC Cylindrical Grinding on C510 Phosphor Bronze?
Machined C510 Phosphor Bronze edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What tolerances can you hold for CNC Cylindrical Grinding C510 Phosphor Bronze?
Achievable tolerances for C510 Phosphor Bronze grinding depend on the alloy, geometry and feature size. Grinding routinely holds single-micron tolerances on diameter, flatness and parallelism. Exact figures are confirmed against your drawing callouts.
What material thickness or size range suits CNC Cylindrical Grinding C510 Phosphor Bronze?
We machine C510 Phosphor Bronze across a broad size range; share your part envelope for confirmation.
Which industries use CNC Cylindrical Grinding C510 Phosphor Bronze parts?
CNC Cylindrical Grinding C510 Phosphor Bronze parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C510 Phosphor Bronze components are required.